Yoke Type Track Roller NATR40-PP 40x80x32 mm
Item number:
NATR40-PP
Item features:
The yoke type track roller NATR40-PP can support high radial and also axial loads. Due to the profiled outer surface of the outer ring, it can compensate for axial loads from minor misalignments and skews.
Technical ScribbleZoomable
Technical Data
Inside Ø (mm): | 40 |
Outside Ø (mm): | 80 |
Width (mm): | 32 |
Axial Guidance: | yes |
Tolerance for inside-Ø (mm): | 0/-0,012 |
Tolerance for outside-Ø (mm): | 0/-0,013 |
Tolerance for width (mm): | 0/-0,12 |
Application: | Conveyor technology |
Seal: | PP |
Inner Ring: | yes |
Cage Material: | Sheet Steel |
Magnetic: | yes |
Norm: | ISO 7063 |
Ring Material: | Rolling Bearing Steel |
Type of lubrication: | greased |
max. Operating Temperature: | +120°C |
Rolling Element Material: | Rolling Bearing Steel |
min. Operating Temperature: | -40°C |
Item weight: | 0,80 kg |
Features
- it consists of a thick-walled outer ring with spherical outside surface profile and a cage-guided needle-insert, two rib washers are pressed on the inner ring
- supports high radial and axial loads from slight misalignments and skewed running, it has the capacity of supporting higher axial forces due to the seal
- with inner ring, can be used if the surface of the shaft is not suitable as a raceway
- with axial guidance
- seal: three-stage sealing on both sides by plastic axial plain washers (PP)
- In addition to this article, we can also offer bearings of the brands FAG, KOYO, NSK, SKF, SNR, etc. on request.