Yoke Type Track Roller NATR25-PP 25x52x25 mm
Item number:
NATR25-PP
Item features:
The yoke type track roller NATR25-PP can support high radial and also axial loads. Due to the profiled outer surface of the outer ring, it can compensate for axial loads from minor misalignments and skews.
Technical ScribbleZoomable
Technical Data
Inside Ø (mm): | 25 |
Outside Ø (mm): | 52 |
Width (mm): | 25 |
Tolerance for inside-Ø (mm): | 0/-0,01 |
Tolerance for outside-Ø (mm): | 0/-0,013 |
Tolerance for width (mm): | 0/-0,12 |
Axial Guidance: | yes |
Inner Ring: | yes |
Seal: | PP |
Ring Material: | Rolling Bearing Steel |
Rolling Element Material: | Rolling Bearing Steel |
Cage Material: | Sheet Steel |
Type of lubrication: | greased |
Application: | Conveyor technology |
max. Operating Temperature: | +120°C |
min. Operating Temperature: | -40°C |
Magnetic: | yes |
Norm: | ISO 7063 |
Item weight: | 0,28 kg |
Features
- it consists of a thick-walled outer ring with spherical outside surface profile and a cage-guided needle-insert, two rib washers are pressed on the inner ring
- supports high radial and axial loads from slight misalignments and skewed running, it has the capacity of supporting higher axial forces due to the seal
- with inner ring, can be used if the surface of the shaft is not suitable as a raceway
- with axial guidance
- seal: three-stage sealing on both sides by plastic axial plain washers (PP)
- In addition to this article, we can also offer bearings of the brands FAG, KOYO, NSK, SKF, SNR, etc. on request.