Yoke Type Track Roller NATR17 17x40x21 mm
Item number: NATR17
Item features:
The yoke type track roller NATR17 can support high radial loads. Due to the profiled outer surface of the outer ring, it can compensate for axial loads from minor misalignments and skews.
Technical ScribbleZoomable
Technical Data
Inside Ø (mm): | 17 |
Outside Ø (mm): | 40 |
Width (mm): | 21 |
Tolerance for inside-Ø (mm): | 0/-0,008 |
Tolerance for outside-Ø (mm): | 0/-0,011 |
Tolerance for width (mm): | 0/-0,12 |
Axial Guidance: | yes |
Inner Ring: | yes |
Seal: | gap seal on both sides |
Ring Material: | Rolling Bearing Steel |
Rolling Element Material: | Rolling Bearing Steel |
Cage Material: | Sheet Steel |
Type of lubrication: | greased |
Application: | Conveyor technology |
max. Operating Temperature: | +120°C |
min. Operating Temperature: | -40°C |
Magnetic: | yes |
Norm: | ISO 7063 |
Item weight: | 0,14 kg |
Features
- it consists of a thick-walled outer ring with profiled outside surface profile and a cage-guided needle-insert, two rib washers are pressed on the inner ring
- supports high radial and axial loads from slight misalignments and skewed running
- with inner ring, can be used if the surface of the shaft is not suitable as a raceway
- with axial guidance
- seal: gap seal on both sides
- In addition to this article, we can also offer bearings of the brands FAG, KOYO, NSK, SKF, SNR, etc. on request.