Englisch
Deutsch
Yoke Type Track Roller NA2205 2RS 25x52x18 mm
Item number:
NA2205-2RS
Item features:
The yoke type track roller NA2205-2RS can support high radial loads. Due to the profiled outer surface of the outer ring, it can compensate minor misalignments and skews.
Technical ScribbleZoomable
Technical Data
| Inside Ø (mm): | 25 |
| Outside Ø (mm): | 52 |
| Width (mm): | 18 |
| Tolerance for inside-Ø (mm): | 0/-0,01 |
| Tolerance for outside-Ø (mm): | 0/-0,013 |
| Tolerance for width (mm): | 0/-0,12 |
| Axial Guidance: | no |
| Inner Ring: | yes |
| Seal: | 2RS |
| Ring Material: | Rolling Bearing Steel |
| Rolling Element Material: | Rolling Bearing Steel |
| Cage Material: | Sheet Steel |
| Type of lubrication: | greased |
| Application: | Conveyor technology |
| max. Operating Temperature: | +100°C (briefly up to +120°C) |
| min. Operating Temperature: | -40°C |
| Magnetic: | yes |
| Norm: | ISO 15 |
| Item weight: | 0,21 kg |
Features
- it consists of a thick-walled outer ring with profiled outside surface profile and a needle roller and cage assembly, it is not sealed but filled with grease
- supports high radial loads
- The profiled outer surface compensates minor misalignments and skews.
- with inner ring, can be used if the surface of the shaft is not suitable as a raceway
- without axial guidance
- dismountable
- seal: contact lip seal on both sides made of rubber (2RS) for high sealing effect
- If you need this bearing in RS design with only one seal and one open side, you can simply remove one of the two seals: to the instructions
- In addition to this article, we can also offer bearings of the brands FAG, KOYO, NSK, SKF, SNR, etc. on request.