Track Roller LR5006 2RS TN 30x62x19 mm
Item number:
LR5006-2RS-TN
Item features:
The track roller LR5006-2RS-TN (NPPU) is based on a double-row angular ball bearing, can absorb very high radial and axial loads and can compensate for minor misalignment and skew.
Technical ScribbleZoomable
Technical Data
Inside Ø (mm): | 30 |
Outside Ø (mm): | 62 |
Width (mm): | 19 |
Tolerance for inside-Ø (mm): | 0/-0,01 |
Tolerance for outside-Ø (mm): | 0/-0,013 |
Tolerance for width (mm): | 0/-0,12 |
Application: | Conveyor technology |
Seal: | 2RS |
Cage Material: | Plastic |
Magnetic: | yes |
Norm: | ISO 15 |
Profile Form Outer Ring: | Crowned |
Ring Material: | Rolling Bearing Steel |
Type of lubrication: | greased |
max. Operating Temperature: | +100°C (briefly up to +120°C) |
Rolling Element Material: | Rolling Bearing Steel |
min. Operating Temperature: | -40°C |
Item weight: | 0,25 kg |
Features
- it consists of a thick-walled outer ring with a spherical outside surface profile, an inner ring as well as a ball-cage assembly with plastic cage - the structure is similar to a deep groove ball bearing respectively an angular ball bearing and can be mounted on an axis
- supports either high radial or high axial forces in both directions
- suitable for higher load capacities than single row track rollers of the series LR2, LR6 und LR60
- outer ring with spherical surface, misalignments with respect to the raceway can be compensated
- cage material: plastic; the low weight and the elasticity of the plastic have a positive effect on the sliding and emergency running properties as well as the shock resistance; suitable for quiet running
- seal: contact lip seal on both sides made of rubber (2RS) (former NPPU) for high sealing effect
- If you need this bearing in RS design with only one seal and one open side, you can simply remove one of the two seals: to the instructions
- In addition to this article, we can also offer bearings of the brands FAG, KOYO, NSK, SKF, SNR, etc. on request.