English
Deutsch
from 2,49 € 
from 8,90 €
, 
or 
until 15:00 - the shipping takes place on the same day.
Track Roller LR203 2RS 17x47x12 mm
Item number: LR203-2RS
Technical ScribbleZoomable
Technical Data
| Inside Ø (mm): | 17 |
| Outside Ø (mm): | 47 |
| Width (mm): | 12 |
| Tolerance for inside-Ø (mm): | 0/-0,008 |
| Tolerance for outside-Ø (mm): | 0/-0,011 |
| Tolerance for width (mm): | 0/-0,12 |
| Rows Of Balls: | single row |
| Seal: | 2RS |
| Ring Material: | Wälzlagerstahl |
| Rolling Element Material: | Wälzlagerstahl |
| Cage Material: | Stahlblech |
| Profiled Outer Ring: | no |
| Magnetic: | ja |
| Product weight: | 0,1100 kg |
Features
- it consists of a thick-walled outer ring with a spherical outside surface profile, an inner ring as well as a ball-cage assembly with sheet steel cage - the structure is similar to a deep groove ball bearing respectively an angular ball bearing and can be mounted on an axis
- supports either high radial or high axial forces in both directions
- suitable for higher speeds than series LR50 and LR52 and for higher load capacities than series LR6
- outer ring with spherical surface, misalignments with respect to the raceway can be compensated
- cage material: sheet steel, high load-bearing capacity and high strength; suitable for continuous high temperatures
- seal: contact lip seal on both sides made of rubber (2RS) (former NPPU) for high sealing effect
- If you need this bearing in RS design with only one seal and one open side, you can simply remove one of the two seals: to the instructions
- In addition to this article, we can also offer bearings of the brands FAG, KOYO, NSK, SKF, SNR, etc. on request.
Further Information
Rating
Question on item
Please use our product request form on the contact page to request articles made to specification