Track Roller LR201 2RS 12x35x10 mm
Item number:
LR201-2RS
Item features:
The track roller LR201-2RS (NPPU) is suitable for high radial and axial loads. It is based on a single-row deep groove ball bearing and can compensate for minor misalignment and skew.
Technical ScribbleZoomable
Technical Data
Inside Ø (mm): | 12 |
Outside Ø (mm): | 35 |
Width (mm): | 10 |
Tolerance for inside-Ø (mm): | 0/-0,008 |
Tolerance for outside-Ø (mm): | 0/-0,011 |
Tolerance for width (mm): | 0/-0,12 |
Application: | Conveyor technology |
Seal: | 2RS |
Cage Material: | Sheet Steel |
Magnetic: | yes |
Norm: | ISO 15 |
Profile Form Outer Ring: | Crowned |
Ring Material: | Rolling Bearing Steel |
Type of lubrication: | greased |
max. Operating Temperature: | +100°C (briefly up to +120°C) |
Rolling Element Material: | Rolling Bearing Steel |
min. Operating Temperature: | -40°C |
Item weight: | 50 g |
Features
- it consists of a thick-walled outer ring with a spherical outside surface profile, an inner ring as well as a ball-cage assembly with sheet steel cage - the structure is similar to a deep groove ball bearing respectively an angular ball bearing and can be mounted on an axis
- supports either high radial or high axial forces in both directions
- suitable for higher speeds than series LR50 and LR52 and for higher load capacities than series LR6
- outer ring with spherical surface, misalignments with respect to the raceway can be compensated
- cage material: sheet steel, high load-bearing capacity and high strength; suitable for continuous high temperatures
- seal: contact lip seal on both sides made of rubber (2RS) (former NPPU) for high sealing effect
- If you need this bearing in RS design with only one seal and one open side, you can simply remove one of the two seals: to the instructions
- In addition to this article, we can also offer bearings of the brands FAG, KOYO, NSK, SKF, SNR, etc. on request.
Further Information
Customer Ratings
Entries 1 – 5 of 10
Entries 1 – 5 of 10