Tapered Roller Bearing 33018 90x140x39 mm
Item number: 33018
Item features:
The tapered roller bearing 33018 has tapered rollers as rolling elements and is suitable for high combined loads from the radial and axial directions. Main dimensions according to DIN 720.
Technical ScribbleZoomable
Technical Data
Inside Ø (mm): | 90 |
Outside Ø (mm): | 140 |
Width (mm): | 39 |
Ring Material: | Rolling Bearing Steel |
Seal: | open |
Cage Material: | Rolling bearing steel |
Rolling Element Material: | Rolling Bearing Steel |
Width Inner Ring (mm): | 39 |
Width Outer Ring (mm): | 32.5 |
Magnetic: | yes |
Type of lubrication: | oiled |
Norm: | DIN 720 |
Tolerance for width of the bearing (mm): | 0,2/-0,2 |
Tolerance For Width Inner Ring (mm): | 0/-0,2 |
Tolerance For Width Outer Ring (mm): | 0/-0,2 |
min. Operating Temperature: | -40°C |
max. Operating Temperature: | +150°C |
Tolerance for outside-Ø (mm): | 0/-0,02 |
Tolerance for inside-Ø (mm): | 0/-0,02 |
Item weight: | 2,22 kg |
Features
- has conical rollers as rolling elements
- suitable for high combined loads in one direction
- it has also an axial load carrying capacity on both sides in the X- or O-arrangement in pairs
- narrow series with relatively small outer diameter
- very good fixed bearing properties in one direction
- manufacturers of bearings, such as FAG, KOYO, NSK, SKF, SNR, etc. assign different suffixes for their characteristics, for better orientation take note of the comparison table of bearings (see further information)