Stud Type Track Roller PWKRE47 2RS 2HS 24x47x66 mm
Item number:
PWKRE47-2RS-2HS
Item features:
Stable even in curves. The stud type track roller PWKRE47-2RS can withstand very high loads while rolling on a mating track. It is based on a full complement cylindrical roller bearing and suitable for very high speeds. Due to the profiled outer surface of the outer ring, it can compensate for axial loads from minor misalignments and skews. It is fastened with eccentric ring.
Technical ScribbleZoomable
Technical Data
Outside Ø (mm): | 47 |
Outside Ø Cones (mm): | 24 |
Width (mm): | 66 |
Tolerance for Outside Ø Roller (mm): | 0/-0,011 |
Tolerance for Outside Ø Cones (mm): | 0/-0,021 |
Tolerance for width (mm): | 0/-0,12 |
Mounting system: | Both sides hexagonal socket (2HS) |
Seal: | 2RS |
Ring Material: | Rolling Bearing Steel |
Rolling Element Material: | Rolling Bearing Steel |
Cage Material: | Sheet Steel |
Type of lubrication: | greased |
Application: | Conveyor technology |
max. Operating Temperature: | +100°C (briefly up to +120°C) |
min. Operating Temperature: | -40°C |
Magnetic: | yes |
Norm: | ISO 7063 |
Item weight: | 0,40 kg |
Features
- there is a hexagonal socket on the roller and thread-side for assembly (= 2HS)
- are based on cylindrical roller bearings
- it consists of a thick-walled outer ring with spherical outside surface profile, a solid roller stud with a thread for fixing, rolling ribs and a full complement of rolling elements as well as labyrinth seals
- it has a particularly high load capacity by the maximum number of rolling elements and supports either very high radial or high axial loads from slighter misalignments and skewed running
- suitable for high speeds
- mounting with eccentric ring, the stud type track roller can thus be readjusted and allows larger manufacturing tolerances of the adjacent construction
- with axial guidance
- the outer ring is guided by the central rib and the rolling elements
- seal: contact lip seal on both sides made of rubber (2RS) for high sealing effect
- If you need this bearing in RS design with only one seal and one open side, you can simply remove one of the two seals: to the instructions
- In addition to this article, we can also offer bearings of the brands FAG, KOYO, NSK, SKF, SNR, etc. on request.