Stud Type Track Roller KRV62 PP 2HS 62x24x80 mm
Item number:
KRV62-PP-2HS
Item features:
Stable even in curves. The stud type track roller KRV62-PP can withstand high loads while rolling on a mating track. It is based on a full complement needle bearing and suitable for high speeds. Due to the profiled outer surface of the outer ring, it can compensate for axial loads from minor misalignments and skews.
Technical ScribbleZoomable
Technical Data
Outside Ø (mm): | 62 |
Width (mm): | 80 |
Tolerance for width (mm): | 0/-0,12 |
Application: | Conveyor technology |
Outside Ø Cones (mm): | 24 |
Seal: | PP |
Cage Material: | Sheet Steel |
Magnetic: | yes |
Mounting system: | Both sides hexagonal socket (2HS) |
Norm: | ISO 7063 |
Ring Material: | Rolling Bearing Steel |
Type of lubrication: | greased |
Tolerance for Outside Ø Roller (mm): | 0/-0,013 |
Tolerance for Outside Ø Cones (mm): | 0/-0,021 |
max. Operating Temperature: | +120°C |
Rolling Element Material: | Rolling Bearing Steel |
min. Operating Temperature: | -40°C |
Item weight: | 0,79 kg |
Features
- there is a hexagonal socket on the roller and thread-side for assembly (= 2HS)
- are based on needle roller bearings
- it consists of a thick-walled outer ring with spherical outside surface profile, a solid roller stud with a thread for fixing, rolling ribs and a full complement needle roller set as well as a three-stage seal on both sides of the bearing provided by axial plain washers made of plastic
- it has a particularly high load capacity by the maximum number of rolling elements and supports either high radial or high axial loads from slighter misalignments and skewed running
- with axial guidance
- the axial guidance is carried out by rolling elements and ribs
- seal: three-stage seal consisting of axial plain washers made of rubber on both sides (PP)
- In addition to this article, we can also offer bearings of the brands FAG, KOYO, NSK, SKF, SNR, etc. on request.