Stud Type Track Roller KR19 2HS 19x8x32 mm
Item number:
KR19-2HS
Item features:
Stable even in curves. The stud type track roller KR19 can withstand high loads while rolling on a mating track. It is based on a needle bearing and suitable for high speeds. Due to the profiled outer surface of the outer ring, it can compensate for axial loads from minor misalignments and skews.
Technical ScribbleZoomable
Technical Data
Outside Ø (mm): | 19 |
Width (mm): | 32 |
Tolerance for width (mm): | 0/-0,12 |
Application: | Conveyor technology |
Outside Ø Cones (mm): | 8 |
Seal: | gap seal on both sides |
Cage Material: | Sheet Steel |
Magnetic: | yes |
Mounting system: | Both sides hexagonal socket (2HS) |
Norm: | ISO 7063 |
Ring Material: | Rolling Bearing Steel |
Type of lubrication: | greased |
Tolerance for Outside Ø Roller (mm): | 0/-0,009 |
Tolerance for Outside Ø Cones (mm): | 0/-0,015 |
max. Operating Temperature: | +120°C |
Rolling Element Material: | Rolling Bearing Steel |
min. Operating Temperature: | -40°C |
Item weight: | 29 g |
Features
- there is a hexagonal socket on the roller and thread-side for assembly (= 2HS)
- are based on needle roller bearings
- it consists of a thick-walled outer ring with spherical outside surface profile, a solid roller stud with a thread for fixing, thrust washers and a needle roller and cage assembly
- it supports high radial and axial loads from slight misalignments and skewed running
- suitable for high speeds
- with axial guidance
- the axial guidance is carried out by rolling elements and ribs
- seal: non-contact gap seal on both sides made of a profiled sheet steel disc for higher speeds than with rubber seal
- In addition to this article, we can also offer bearings of the brands FAG, KOYO, NSK, SKF, SNR, etc. on request.