Englisch
Deutsch
Stainless Steel Miniature Flanged Ball Bearing SS MF 52 2RS W2.3 2x5x2.3 mm
Item number:
SS-MF-52-2RS-W2.3
Item features:
For use in special conditions. The stainless steel miniature ball bearing SS-MF-52-2RS-W2.3 is small and suitable for installation with limited space and on thin shafts. With the flange, it can be fixed axially, e.g. in bore holes. It is resistant to corrosion.
Technical ScribbleZoomable
Technical Data
| Inside Ø (mm): | 2 |
| Outside Ø (mm): | 5 |
| Flange Ø (mm): | 6.2 |
| Flange Width (mm): | 0.6 |
| Width (mm): | 2.3 |
| Tolerance for inside-Ø (mm): | 0/-0,008 |
| Tolerance for outside-Ø (mm): | 0/-0,008 |
| Tolerance for flange-outside-Ø (mm): | 0,22/-0,036 |
| Tolerance for width (mm): | 0/-0,04 |
| Bore: | cylindrical |
| Extended Inner Ring: | no |
| Seal: | 2RS |
| Sealing material: | NBR |
| Ring Material: | Stainless Steel |
| Rolling Element Material: | Stainless Steel |
| Cage Material: | Stainless Steel |
| Type of lubrication: | greased |
| Lifetime lubricated: | yes |
| Seal Colour: | Blue |
| Internal Clearance: | CN (Standard) |
| Tolerance Class: | ABEC 1 / P0 |
| Noise and vibration testing: | Class V |
| max. Operating Temperature: | +100°C (briefly up to +120°C) |
| min. Operating Temperature: | -20°C |
| Magnetic: | yes |
| Norm: | DIN 625-1 |
| Item weight: | 1 g |
Features
- all components are made of stainless steel: the miniature ball bearing has therefore good corrosion resistance to mild media (e.g. fresh water) and is hygienic
- the flange on the outer ring prevents axial displacements
- miniature ball bearing with smallest dimensions
- suitable for high radial loads and light axial loads in both directions
- suitable for high running accuracy and quiet running
- seal: contact lip seal on both sides made of rubber (2RS) for high sealing effect
- If you need this bearing in RS design with only one seal and one open side, you can simply remove one of the two seals: to the instructions
- good fixed bearing property, but can also be used as a floating bearing, each in both directions
- manufacturers of bearings, such as FAG, KOYO, NSK, SKF, SNR, etc. assign different suffixes for their characteristics, for better orientation take note of the comparison table of bearings (see further information)
Further Information
- What does radial and axial load capacity mean?
- Fit recommendations for mounting
- Info sheet ball bearing
- Information about ball bearing seals
- Internal clearance and operating clearance
- Comparison list of roller bearings
- Comparison of features of roller bearings
- How do I clean my bearings?
- How do I grease or oil my bearings?
- Are bearings made of stainless steel 100 per cent corrosion-resistant?
- Can bearings made of stainless steel be magnetic?
- How do I remove a sealing washer or cover plate?