Stainless Steel Miniature Deep Groove Ball Bearing Inch SS2 R166 2RS GF1 4.763 x 9.525 x 3.175 mm
Item number:
SS2-R166-2RS-GF1
Item features:
For use in special conditions. The stainless steel miniature ball bearing SS2-R166-2RS-GF1 in inch-size is small and suitable for installation with limited space and on thin shafts. It is more corrosion resistant than AISI 420 (SS) alloy ball bearings.
Technical ScribbleZoomable
Technical Data
Inside Ø (mm): | 4.763 |
Outside Ø (mm): | 9.525 |
Width (mm): | 3.175 |
Tolerance for inside-Ø (mm): | 0/-0,008 |
Tolerance for outside-Ø (mm): | 0/-0,008 |
Tolerance for width (mm): | 0/-0,12 |
Bore: | cylindrical |
Extended Inner Ring: | no |
Seal: | 2RS |
Sealing material: | NBR |
Ring Material: | Stainless Steel AISI 440C |
Rolling Element Material: | Stainless Steel AISI 440C |
Cage Material: | Stainless Steel |
Type of lubrication: | greased |
Lubrication: | Mobilgrease FM 222 (suitable for the food sector) |
Lifetime lubricated: | yes |
Seal Colour: | Blue |
Internal Clearance: | CN (Standard) |
Tolerance Class: | ABEC 1 / P0 |
Noise and vibration testing: | Class V |
max. Operating Temperature: | +100°C (briefly up to +120°C) |
min. Operating Temperature: | -20°C |
Magnetic: | yes |
Norm: | DIN 625-1 |
Item weight: | 2 g |
Features
- all components are made of stainless steel: the miniature ball bearing has therefore better corrosion resistance to mild media (e.g. fresh water) than SS-bearings and is hygienic.
- miniature ball bearing with smallest dimensions
- suitable for high radial loads and light axial loads in both directions
- suitable for high running accuracy and quiet running
- seal: contact lip seal on both sides made of rubber (2RS) for high sealing effect
- If you need this bearing in RS design with only one seal and one open side, you can simply remove one of the two seals: to the instructions
- Lubrication: Mobilgrease FM 222. This grease is registered with NFS as H1-Lubricant and is therefore approved for the food sector.
- good fixed bearing property, but can also be used as a floating bearing, each in both directions
- manufacturers of bearings, such as FAG, KOYO, NSK, SKF, SNR, etc. assign different suffixes for their characteristics, for better orientation take note of the comparison table of bearings (see further information)
Further Information
- What does radial and axial load capacity mean?
- Fit recommendations for mounting
- Info sheet ball bearing
- Information about ball bearing seals
- Internal clearance and operating clearance
- Comparison list of roller bearings
- Comparison of features of roller bearings
- How do I clean my bearings?
- How do I grease or oil my bearings?
- Are bearings made of stainless steel 100 per cent corrosion-resistant?
- Can bearings made of stainless steel be magnetic?
- How do I remove a sealing washer or cover plate?