Englisch
Deutsch
Stainless Steel Miniature Deep Groove Ball Bearing Inch SS R1810 ZZ / 2Z 7.938 x 12.7 x 3.967 mm
Item number:
SS-R1810-ZZ
Item features:
For use in special conditions. The stainless steel miniature ball bearing SS-R1810-ZZ / 2Z in inch-size is small and suitable for installation with limited space and on thin shafts. It can withstand very high speeds. It is resistant to corrosion.
Technical ScribbleZoomable
Technical Data
| Inside Ø (mm): | 7.938 |
| Outside Ø (mm): | 12.7 |
| Width (mm): | 3.967 |
| Tolerance for inside-Ø (mm): | 0/-0,008 |
| Tolerance for outside-Ø (mm): | 0/-0,008 |
| Tolerance for width (mm): | 0/-0,12 |
| Bore: | cylindrical |
| Extended Inner Ring: | no |
| max. Operating Temperature: | +120°C |
| min. Operating Temperature: | -20°C |
| Tolerance Class: | ABEC 1 / P0 |
| Internal Clearance: | CN (Standard) |
| Seal: | ZZ |
| Ring Material: | Stainless Steel |
| Rolling Element Material: | Stainless Steel |
| Cage Material: | Stainless Steel |
| Sealing material: | Stainless Sheet Steel |
| Type of lubrication: | greased |
| Lifetime lubricated: | yes |
| Magnetic: | yes |
| Noise and vibration testing: | Class V |
| Norm: | DIN 625-1 |
| Item weight: | 1,4 g |
Features
- all components are made of stainless steel: the miniature ball bearing has therefore good corrosion resistance to mild media (e.g. fresh water) and is hygienic
- miniature ball bearing with smallest dimensions
- suitable for high radial loads and light axial loads in both directions
- suitable for high running accuracy, quiet running and very high speeds
- seal: non-contact gap seal on both sides made of a profiled sheet steel disc (ZZ / 2Z) for higher speeds than with rubber seal
- good fixed bearing property, but can also be used as a floating bearing, each in both directions
- manufacturers of bearings, such as FAG, KOYO, NSK, SKF, SNR, etc. assign different suffixes for their characteristics, for better orientation take note of the comparison table of bearings (see further information)
Further Information
- What does radial and axial load capacity mean?
- Fit recommendations for mounting
- Info sheet ball bearing
- Information about ball bearing seals
- Internal clearance and operating clearance
- Comparison list of roller bearings
- Comparison of features of roller bearings
- How do I clean my bearings?
- How do I grease or oil my bearings?
- Are bearings made of stainless steel 100 per cent corrosion-resistant?
- Can bearings made of stainless steel be magnetic?
- How do I remove a sealing washer or cover plate?