Stainless Steel Miniature Axial Deep Groove Ball Bearing SS F6-12M (with d1=12) 6x12x4.5 mm
Item number:
SS-F6-12M-d1-12
Item features:
For use in special conditions. The stainless steel miniature thrust bearing SS-F6-12M is small and suitable for spaces with limited space and on thin shafts. It absorbs loads from an axial direction, can be dismantled and is resistant to corrosion.
Technical ScribbleZoomable
Technical Data
Inside Ø (mm): | 6 |
Inside Ø Shaft Washer (mm): | 6 |
Inside Ø Housing Washer (mm): | 6.2 |
Outside Ø (mm): | 12 |
Outside Ø Housing Washer (mm): | 12 |
Outside Ø Shaft Washer (mm): | 12 |
Width (mm): | 4.5 |
Tolerance for inside-Ø (mm): | 0/-0,008 |
Tolerance for outside-Ø (mm): | 0/-0,011 |
Tolerance for width (mm): | 0,02/-0,25 |
Bore: | cylindrical |
Extended Inner Ring: | no |
Ring Material: | Stainless Steel |
Rolling Element Material: | Stainless Steel |
Cage Material: | Stainless Steel |
Type of lubrication: | oiled |
Lifetime lubricated: | no |
Tolerance Class: | ABEC 1 / P0 |
max. Operating Temperature: | +250°C |
min. Operating Temperature: | -40°C |
Magnetic: | yes |
Item weight: | 2 g |
Features
- miniature thrust bearing series
- all components are made of stainless steel: the thrust bearing is therefore corrosion resistant and hygienic.
- consists of a shaft washer, a spherical housing washer and a ball cage assembly
- suitable for particularly small shaft diameters
- suitable for very high speeds
- manufacturers of bearings, such as FAG, KOYO, NSK, SKF, SNR, etc. assign different suffixes for their characteristics, for better orientation take note of the comparison table of bearings (see further information)
Further Information
- What does radial and axial load capacity mean?
- Fit recommendations for mounting
- Comparison list of roller bearings
- Comparison of features of roller bearings
- In which alignment do I mount my axial deep groove ball bearings?
- How do I clean my bearings?
- How do I grease or oil my bearings?
- Are bearings made of stainless steel 100 per cent corrosion-resistant?
- Can bearings made of stainless steel be magnetic?