Stainless Steel Deep Groove Ball Bearing SS 6908 / 61908 C3 2RS 40x62x12 mm

    Item number: SS-6908-2RS-C3
Rate now
Item features:
Narrow, light and with very good spinning characteristics. The stainless steel deep groove ball bearing SS-6908-2RS-C3 is narrow, can also be used with limited space and is resistant to corrosion.
Category: Ball Bearings
  • Delivery time: Available

From Unit price / pcs
4 23,13 €*
10 21,85 €*
50 20,56 €*
200 19,28 €*
1000 17,99 €*
25,70 €
incl. 19% VAT , plus shipping charge (Standard)
pcs
Secure Shopping
Sofort Überweisung Rechnung Kreditkarte Lastschrift Nachnahme

Technical Scribble

Technical Data





Inside Ø (mm): 40
Outside Ø (mm): 62
Width (mm): 12
max. Operating Temperature: +100°C (briefly up to +120°C)
min. Operating Temperature: -20°C
Tolerance for inside Ø (mm): 0/-0,012
Tolerance for outside Ø (mm): 0/-0,013
Tolerance for width (mm): 0/-0,12
Bore: cylindrical
Extended Inner Ring: no
Tolerance Class: ABEC 1 / P0
Internal Clearance: C3 (increased clearance)
Noise and vibration testing: Class V
Seal: 2RS
Seal Colour: Blue
Ring Material: Stainless Steel
Rolling Element Material: Stainless Steel
Cage Material: Stainless Steel
Sealing material: NBR
Type of lubrication: greased
Lifetime lubricated: yes
Magnetic: yes
Norm: DIN 625-1
Item weight: 0,11 kg

Features

  • all components are made of stainless steel: the deep groove ball bearing has therefore good corrosion resistance to mild media (e.g. fresh water) and is hygienic
  • thin section bearing with a thin cross section
  • suitable for space-saving installation in radial and axial directions
  • extra light series with compact dimensions and low weight
  • suitable for radial loads and light axial loads in both directions
  • offers high running accuracy
  • seal: contact lip seal on both sides made of rubber (2RS) for high sealing effect
  • If you need this bearing in RS design with only one seal and one open side, you can simply remove one of the two seals: to the instructions
  • with increased radial internal clearance (C3): for high temperature gradient between the bearing rings or for fastening with press fit
  • good fixed bearing property, but can also be used as a floating bearing, each in both directions
  • manufacturers of bearings, such as FAG, KOYO, NSK, SKF, SNR, etc. assign different suffixes for their characteristics, for better orientation take note of the comparison table of bearings (see further information)

Further Information

Customer Ratings

Write the first review for this item and help others make a purchase decision!:

Average item rating

Write a review
Category: Ball Bearings
  • Delivery time: Available

From Unit price / pcs
4 23,13 €*
10 21,85 €*
50 20,56 €*
200 19,28 €*
1000 17,99 €*
25,70 €
incl. 19% VAT , plus shipping charge (Standard)
pcs
Secure Shopping
Sofort Überweisung Rechnung Kreditkarte Lastschrift Nachnahme