Englisch
Deutsch
Stainless Steel Deep Groove Ball Bearing SS 6905 / 61905 ZZ / 2Z 25x42x9 mm
Item number:
SS-6905-ZZ
Item features:
Narrow, light and with very good spinning characteristics. The stainless steel deep groove ball bearing SS-6905-ZZ / 2Z is narrow, can also be used with limited space and is resistant to corrosion. The low weight allows for very high speeds.
Technical ScribbleZoomable
Technical Data
| Inside Ø (mm): | 25 |
| Outside Ø (mm): | 42 |
| Width (mm): | 9 |
| Tolerance for inside-Ø (mm): | 0/-0,01 |
| Tolerance for outside-Ø (mm): | 0/-0,011 |
| Tolerance for width (mm): | 0/-0,12 |
| Seal: | ZZ |
| Internal Clearance: | CN (Standard) |
| Slot and Snap Ring: | no |
| Flange: | no |
| Ring Material: | Stainless Steel |
| Rolling Element Material: | Stainless Steel |
| Cage Material: | Stainless Steel |
| Sealing material: | Stainless Sheet Steel |
| Full Complement Ball Set: | no |
| Rows of Rolling Elements: | single row |
| Tolerance Class: | ABEC 1 / P0 |
| Noise and vibration testing: | Class V |
| Norm: | DIN 625-1 |
| Magnetic: | yes |
| Type of lubrication: | greased |
| Lifetime lubricated: | yes |
| Item weight: | 41 g |
Features
- all components are made of stainless steel: the deep groove ball bearing has therefore good corrosion resistance to mild media (e.g. fresh water) and is hygienic
- thin section bearing with a thin cross section
- suitable for space-saving installation in radial and axial directions
- suitable for high speeds compared to deep groove ball bearings with a larger cross section
- extra light series with compact dimensions and low weight
- suitable for radial loads and light axial loads in both directions
- offers high running accuracy, quiet running and very high speeds
- seal: non-contact gap seal on both sides made of a profiled sheet steel disc (ZZ / 2Z) for higher speeds than with rubber seal
- good fixed bearing property, but can also be used as a floating bearing, each in both directions
- manufacturers of bearings, such as FAG, KOYO, NSK, SKF, SNR, etc. assign different suffixes for their characteristics, for better orientation take note of the comparison table of bearings (see further information)
Further Information
- What does radial and axial load capacity mean?
- Fit recommendations for mounting
- Info sheet ball bearing
- Information about ball bearing seals
- Internal clearance and operating clearance
- Comparison list of roller bearings
- Comparison of features of roller bearings
- How do I clean my bearings?
- How do I grease or oil my bearings?
- Are bearings made of stainless steel 100 per cent corrosion-resistant?
- Can bearings made of stainless steel be magnetic?
- How do I remove a sealing washer or cover plate?