Stainless Steel Deep Groove Ball Bearing SS 6701 / 61701 2RS 12x18x4 mm

    Item number: SS-6701-2RS

Item features:
Extremely narrow, extremely light and with utmost good spinning characteristics. The stainless steel deep groove ball bearing SS-6701-2RS is narrow, can also be used with limited space and is resistant to corrosion.
Category: Ball Bearings
  • Delivery time: Available

From Unit price / pcs
4 4,25 €*
10 4,01 €*
50 3,78 €*
200 3,55 €*
1000 3,31 €*
4,72 €
incl. 19% VAT , plus shipping charge (Briefversand)
pcs
Secure Shopping
ApplePay GPay Rechnung Kreditkarte Lastschrift Überweisung

Technical Scribble

Technical Data





Inside Ø (mm): 12
Outside Ø (mm): 18
Width (mm): 4
max. Operating Temperature: +100°C (briefly up to +120°C)
min. Operating Temperature: -20°C
Tolerance for inside Ø (mm): 0/-0,008
Tolerance for outside Ø (mm): 0/-0,008
Tolerance for width (mm): 0/-0,12
Bore: cylindrical
Extended Inner Ring: no
Tolerance Class: ABEC 1 / P0
Internal Clearance: CN (Standard)
Noise and vibration testing: Class V
Seal: 2RS
Seal Colour: Blue
Ring Material: Stainless Steel
Rolling Element Material: Stainless Steel
Cage Material: Stainless Steel
Sealing material: NBR
Type of lubrication: greased
Lifetime lubricated: yes
Magnetic: yes
Norm: DIN 625-1
Item weight: 3 g

Features

  • all components are made of stainless steel: the deep groove ball bearing has therefore good corrosion resistance to mild media (e.g. fresh water) and is hygienic
  • thin section bearing with ultra-thin cross section
  • suitable for space-saving installation in radial and axial directions
  • extra light series with compact dimensions and low weight
  • suitable for radial loads and light axial loads in both directions
  • offers high running accuracy and quiet running
  • seal: contact lip seal on both sides made of rubber (2RS) for high sealing effect
  • If you need this bearing in RS design with only one seal and one open side, you can simply remove one of the two seals: to the instructions
  • good fixed bearing property, but can also be used as a floating bearing, each in both directions
  • manufacturers of bearings, such as FAG, KOYO, NSK, SKF, SNR, etc. assign different suffixes for their characteristics, for better orientation take note of the comparison table of bearings (see further information)

Further Information

Manufacturer information

Quasi-Manufacturer
Kugellager-Express GmbH
Grenzweg 14a
33758 Schloß Holte-Stukenbrock
Germany

Customer Ratings

5/5

Average item rating

Write a review

7 Customer Ratings Total

4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
Entries 1 – 5 of 7
Super Ersatzlager
5 from 5
Super Ersatzlager

Verbaue in meinem RC Auto die Lager von Kegellager-express. Extrem schneller Versand zu guten Preisen.
Als Radlager kommen absofort die Edelstahllager zum Einsatz da es doch mal nass wird.

Sehr gut sortierter Shop
5 from 5
Sehr gut sortierter Shop

Die Artikel sind schnell eingetroffen und waren von erwartet guter Qualität

Sehr gute Lager, hervorragender Shop
5 from 5
Sehr gute Lager, hervorragender Shop

Wie immer, alles Bestens. Super Preis-Leistungsverhältnis. Top Qualitätslager. Schneller Service und schnelle Auftragsabwicklung.

Schnelle Lieferung
5 from 5
Schnelle Lieferung

Sehr gute Lager und Pass genau

Perfekt wie immer...
5 from 5
Perfekt wie immer...

Schnell geliefert zu fairen Preisen inkl Lieferkonditionen. Sogar über die Landesgrenze hinaus.

Entries 1 – 5 of 7
Category: Ball Bearings
  • Delivery time: Available

From Unit price / pcs
4 4,25 €*
10 4,01 €*
50 3,78 €*
200 3,55 €*
1000 3,31 €*
4,72 €
incl. 19% VAT , plus shipping charge (Briefversand)
pcs
Secure Shopping
ApplePay GPay Rechnung Kreditkarte Lastschrift Überweisung