Englisch
Deutsch
Stainless Steel Deep Groove Ball Bearing SS 6203 C3 2RS 17x40x12 mm
Item number:
SS-6203-2RS-C3
Item features:
Stable and with good spinning characteristics. The stainless steel deep groove ball bearing SS-6203-2RS-C3 is a true all-rounder and, due to its balanced properties, it is suitable for a variety of applications and is resistant to corrosion. Main dimensions according to DIN 625-1.
Technical ScribbleZoomable
Technical Data
| Inside Ø (mm): | 17 |
| Outside Ø (mm): | 40 |
| Width (mm): | 12 |
| Tolerance for inside-Ø (mm): | 0/-0,008 |
| Tolerance for outside-Ø (mm): | 0/-0,011 |
| Tolerance for width (mm): | 0/-0,12 |
| Bore: | cylindrical |
| Extended Inner Ring: | no |
| Seal: | 2RS |
| Sealing material: | NBR |
| Ring Material: | Stainless Steel |
| Rolling Element Material: | Stainless Steel |
| Cage Material: | Stainless Steel |
| Type of lubrication: | greased |
| Lifetime lubricated: | yes |
| Seal Colour: | Blue |
| Internal Clearance: | C3 (increased clearance) |
| Tolerance Class: | ABEC 1 / P0 |
| Noise and vibration testing: | Class V |
| max. Operating Temperature: | +100°C (briefly up to +120°C) |
| min. Operating Temperature: | -20°C |
| Magnetic: | yes |
| Norm: | DIN 625-1 |
| Item weight: | 65 g |
Features
- all components are made of stainless steel: the deep groove ball bearing has therefore good corrosion resistance to mild media (e.g. fresh water) and is hygienic
- light series with compact dimensions and low weight
- can carry relatively high radial loads despite low weight
- suitable for high radial loads and light axial loads in both directions
- offers high running accuracy and high speeds
- seal: contact lip seal on both sides made of rubber (2RS) for high sealing effect
- If you need this bearing in RS design with only one seal and one open side, you can simply remove one of the two seals: to the instructions
- with increased radial internal clearance (C3): for high temperature gradient between the bearing rings or for fastening with press fit
- good fixed bearing property, but can also be used as a floating bearing, each in both directions
- manufacturers of bearings, such as FAG, KOYO, NSK, SKF, SNR, etc. assign different suffixes for their characteristics, for better orientation take note of the comparison table of bearings (see further information)
Further Information
- What does radial and axial load capacity mean?
- Fit recommendations for mounting
- Info sheet ball bearing
- Information about ball bearing seals
- Internal clearance and operating clearance
- Comparison list of roller bearings
- Comparison of features of roller bearings
- How do I clean my bearings?
- How do I grease or oil my bearings?
- Are bearings made of stainless steel 100 per cent corrosion-resistant?
- Can bearings made of stainless steel be magnetic?
- How do I remove a sealing washer or cover plate?