

Stainless Steel Deep Groove Ball Bearing SS 6001 C3 2RS 12x28x8 mm
Technical ScribbleZoomable
Technical Data
Inside Ø (mm): | 12 |
Outside Ø (mm): | 28 |
Width (mm): | 8 |
Tolerance for inside-Ø (mm): | 0/-0,008 |
Tolerance for outside-Ø (mm): | 0/-0,009 |
Tolerance for width (mm): | 0/-0,12 |
Seal: | 2RS |
Internal Clearance: | C3 (increased clearance) |
Slot and Snap Ring: | no |
Flange: | no |
Ring Material: | Stainless Steel |
Rolling Element Material: | Stainless Steel |
Cage Material: | Stainless Steel |
Sealing material: | NBR |
Full Complement Ball Set: | no |
Rows of Rolling Elements: | single row |
Tolerance Class: | ABEC 1 / P0 |
Magnetic: | yes |
Type of lubrication: | greased |
Lifetime lubricated: | yes |
Item weight: | 22 g |
Features
- all components are made of stainless steel: the deep groove ball bearing has therefore good corrosion resistance to mild media (e.g. fresh water) and is hygienic
- extra light series with compact dimensions and low weight
- suitable for high radial loads and light axial loads in both directions
- offers high running accuracy and high speeds
- seal: contact lip seal on both sides made of rubber (2RS) for high sealing effect
- If you need this bearing in RS design with only one seal and one open side, you can simply remove one of the two seals: to the instructions
- with increased radial internal clearance (C3): for high temperature gradient between the bearing rings or for fastening with press fit
- good fixed bearing property, but can also be used as a floating bearing, each in both directions
Further Information
- What does radial and axial load capacity mean?
- Fit recommendations for mounting
- Info sheet ball bearing
- Information about ball bearing seals
- Internal clearance and operating clearance
- Comparison list of roller bearings
- Comparison of features of roller bearings
- How do I clean my bearings?
- How do I grease or oil my bearings?
- Are bearings made of stainless steel 100 per cent corrosion-resistant?
- Can bearings made of stainless steel be magnetic?
- How do I remove a sealing washer or cover plate?