Englisch
Deutsch
Stainless Steel Deep Groove Ball Bearing SS 6000 C3 2RS 10x26x8 mm
Item number:
SS-6000-2RS-C3
Item features:
Lightweight, stable and with good spinning characteristics. The stainless steel deep groove ball bearing SS-6000-2RS-C3 is a true all-rounder, suitable for a wide range of applications due to its balanced properties and is resistant to corrosion. Main dimensions according to DIN 625-1.
Technical Scribble
Technical Data
| Inside Ø (mm): | 10 |
| Outside Ø (mm): | 26 |
| Width (mm): | 8 |
| max. Operating Temperature: | +100°C (briefly up to +120°C) |
| min. Operating Temperature: | -20°C |
| Tolerance for inside Ø (mm): | 0/-0,008 |
| Tolerance for outside Ø (mm): | 0/-0,009 |
| Tolerance for width (mm): | 0/-0,12 |
| Bore: | cylindrical |
| Extended Inner Ring: | no |
| Tolerance Class: | ABEC 1 / P0 |
| Internal Clearance: | C3 (increased clearance) |
| Noise and vibration testing: | Class V |
| Seal: | 2RS |
| Ring Material: | Stainless Steel |
| Rolling Element Material: | Stainless Steel |
| Cage Material: | Stainless Steel |
| Sealing material: | NBR |
| Type of lubrication: | greased |
| Lifetime lubricated: | yes |
| Magnetic: | yes |
| Norm: | DIN 625-1 |
| Item weight: | 19 g |
Features
- all components are made of stainless steel: the deep groove ball bearing has therefore good corrosion resistance to mild media (e.g. fresh water) and is hygienic
- extra light series with compact dimensions and low weight
- suitable for high radial loads and light axial loads in both directions
- offers high running accuracy and high speeds
- seal: contact lip seal on both sides made of rubber (2RS) for high sealing effect
- If you need this bearing in RS design with only one seal and one open side, you can simply remove one of the two seals: to the instructions
- with increased radial internal clearance (C3): for high temperature gradient between the bearing rings or for fastening with press fit
- good fixed bearing property, but can also be used as a floating bearing, each in both directions
Further Information
- What does radial and axial load capacity mean?
- Fit recommendations for mounting
- Info sheet ball bearing
- Information about ball bearing seals
- Internal clearance and operating clearance
- Comparison list of roller bearings
- Comparison of features of roller bearings
- How do I clean my bearings?
- How do I grease or oil my bearings?
- Are bearings made of stainless steel 100 per cent corrosion-resistant?
- Can bearings made of stainless steel be magnetic?
- How do I remove a sealing washer or cover plate?
Manufacturer information
Quasi-ManufacturerKugellager-Express GmbH
Grenzweg 14a
33758 Schloß Holte-Stukenbrock
Germany