Stainless Steel Deep Groove Ball Bearing SS 16004 2RS 20x42x8 mm
Item number:
SS-16004-2RS
Item features:
The stainless steel deep groove ball bearing SS-16004-2RS is narrow. It is particularly suitable for achieving the best possible load capacity and high speeds in limited space conditions. It is resistant to corrosion. Main dimensions according to DIN 625-1.
Technical Scribble
Technical Data
Inside Ø (mm): | 20 |
Outside Ø (mm): | 42 |
Width (mm): | 8 |
max. Operating Temperature: | +100°C (briefly up to +120°C) |
min. Operating Temperature: | -20°C |
Tolerance for inside Ø (mm): | 0/-0,01 |
Tolerance for outside Ø (mm): | 0/-0,011 |
Tolerance for width (mm): | 0/-0,12 |
Bore: | cylindrical |
Extended Inner Ring: | no |
Tolerance Class: | ABEC 1 / P0 |
Internal Clearance: | CN (Standard) |
Noise and vibration testing: | Class V |
Seal: | 2RS |
Seal Colour: | Blue |
Ring Material: | Stainless Steel |
Rolling Element Material: | Stainless Steel |
Cage Material: | Stainless Steel |
Sealing material: | NBR |
Type of lubrication: | greased |
Lifetime lubricated: | yes |
Magnetic: | yes |
Norm: | DIN 625-1 |
Item weight: | 50 g |
Features
- all components are made of stainless steel; the deep groove ball bearing has therefore good corrosion resistance to mild media (e.g. fresh water) and is hygienic
- narrow design enables space-saving installation in axial direction
- extra light series with compact dimensions and low weight
- suitable for high radial loads and light axial loads in both directions
- seal: contact lip seal on both sides made of rubber (2RS) for high sealing effect
- If you need this bearing in RS design with only one seal and one open side, you can simply remove one of the two seals: to the instructions
- good fixed bearing property, but can also be used as a floating bearing, each in both directions
- manufacturers of bearings, such as FAG, KOYO, NSK, SKF, SNR, etc. assign different suffixes for their characteristics, for better orientation take note of the comparison table of bearings (see further information)
Further Information
- What does radial and axial load capacity mean?
- Fit recommendations for mounting
- Info sheet ball bearing
- Information about ball bearing seals
- Internal clearance and operating clearance
- Comparison list of roller bearings
- Comparison of features of roller bearings
- How do I clean my bearings?
- How do I grease or oil my bearings?
- Are bearings made of stainless steel 100 per cent corrosion-resistant?
- Can bearings made of stainless steel be magnetic?
- How do I remove a sealing washer or cover plate?