Englisch
Deutsch
Stainless Steel Angular Ball Bearing SS 5200 2RS TN / SS 3200 2RS TN 10x30x14 mm
Item number:
SS-5200-2RS-TN
Item features:
Double row design for higher load capacity. The double-row angular contact ball bearing SS-5200-2RS-TN is ideal for high combined loads from the radial and axial directions. Main dimensions according to DIN 628-3.
Technical ScribbleZoomable
Technical Data
| Inside Ø (mm): | 10 |
| Outside Ø (mm): | 30 |
| Width (mm): | 14 |
| Tolerance for inside-Ø (mm): | 0/-0,008 |
| Tolerance for outside-Ø (mm): | 0/-0,009 |
| Tolerance for width (mm): | 0/-0,12 |
| Bore: | cylindrical |
| Extended Inner Ring: | no |
| Seal: | 2RS |
| Sealing material: | NBR |
| Ring Material: | Stainless Steel |
| Rolling Element Material: | Stainless Steel |
| Cage Material: | Plastic |
| Type of lubrication: | greased |
| Lifetime lubricated: | yes |
| Contact Angle: | 30° |
| Tolerance Class: | ABEC 1 / P0 |
| Noise and vibration testing: | Class V |
| max. Operating Temperature: | +100°C (briefly up to +120°C) |
| min. Operating Temperature: | -20°C |
| Magnetic: | yes |
| Norm: | DIN 628-3 |
| Item weight: | 52 g |
Features
- all components are made of stainless steel: the angular ball bearing is therefore corrosion resistant and hygienic
- angular ball bearing with two rows of balls
- suitable for high radial loads and axial loads in both directions
- suitable for high running accuracy, quiet running and high speeds
- cage material: plastic; the low weight and the elasticity of the plastic have a positive effect on the sliding and emergency running properties as well as the shock resistance; suitable for quiet running
- seal: contact lip seal on both sides made of rubber (2RS) for high sealing effect
- If you need this bearing in RS design with only one seal and one open side, you can simply remove one of the two seals: to the instructions
- good fixed bearing property, but can also be used as a floating bearing, each in both directions
- manufacturers of bearings, such as FAG, KOYO, NSK, SKF, SNR, etc. assign different suffixes for their characteristics, for better orientation take note of the comparison table of bearings (see further information)
Further Information
- What does radial and axial load capacity mean?
- Fit recommendations for mounting
- Information about ball bearing seals
- Comparison list of roller bearings
- Comparison of features of roller bearings
- How do I clean my bearings?
- How do I grease or oil my bearings?
- Are bearings made of stainless steel 100 per cent corrosion-resistant?
- Can bearings made of stainless steel be magnetic?
- How do I remove a sealing washer or cover plate?