Sprag Type Clutch KKFL15 2RS 15x35x16 mm
Item number:
KKFL15-2RS
Item features:
The rolling bearing freewheel KKFL15-2RS consists of standard bearing with a special snap fit and cage. It has rubber seals on both sides.
Technical ScribbleZoomable
Technical Data
Inside Ø (mm): | 15 |
Outside Ø (mm): | 35 |
Width (mm): | 11 |
Tolerance for inside-Ø (mm): | 0/-0,010 |
Tolerance for outside-Ø (mm): | 0/-0,011 |
Tolerance for width (mm): | 0,1/-0,1 |
Seal: | 2RS |
Inner Ring: | yes |
Sprags Material: | Rolling bearing steel |
Cage Material: | Plastic |
Keyway: | without |
Ring Material: | Rolling Bearing Steel |
Type of lubrication: | greased |
max. Operating Temperature: | +100°C |
Rolling Element Material: | Rolling Bearing Steel |
max. transferable Torque (Nm): | 34 |
min. Operating Temperature: | -30°C |
Item weight: | 70 g |
Features
- long overrunning life time
- reliable torque transmision through press fit of the outer ring in a dimensionally stable steel housing.
- The construction offers protection against dust
- Seal: rubber seals on both sides
- If you need this bearing in RS design with only one seal and one open side, you can simply remove one of the two seals: to the instructions
- equipped with formchromed sprags
- Temperature resistance between +5°C up to +60°C