Englisch
Deutsch
Sprag Type Clutch KKFL12 2RS 12x32x14 mm
Item number:
KKFL12-2RS
Item features:
The rolling bearing freewheel KKFL12-2RS consists of standard bearing with a special snap fit and cage. It has rubber seals on both sides.
Technical ScribbleZoomable
Technical Data
| Inside Ø (mm): | 12 |
| Outside Ø (mm): | 32 |
| Width (mm): | 10 |
| Tolerance for inside-Ø (mm): | 0/-0,010 |
| Tolerance for outside-Ø (mm): | 0/-0,011 |
| Tolerance for width (mm): | 0,1/-0,1 |
| Keyway: | without |
| Inner Ring: | yes |
| Seal: | 2RS |
| Ring Material: | Rolling Bearing Steel |
| Rolling Element Material: | Rolling Bearing Steel |
| Cage Material: | Plastic |
| Sprags Material: | Rolling bearing steel |
| Type of lubrication: | greased |
| max. transferable Torque (Nm): | 18.6 |
| max. Operating Temperature: | +100°C |
| min. Operating Temperature: | -30°C |
| Item weight: | 50 g |
Features
- long overrunning life time
- reliable torque transmision through press fit of the outer ring in a dimensionally stable steel housing.
- The construction offers protection against dust
- Seal: rubber seals on both sides
- If you need this bearing in RS design with only one seal and one open side, you can simply remove one of the two seals: to the instructions
- equipped with formchromed sprags
- Temperature resistance between +5°C up to +60°C