Split Pillow Block Housing SNL518-615 in a Set with Bearing Insert 2218-K and Adapter Sleeve H318, incl. 2 Locating Rings FRB-12.5/160
Item number:
SNL518-615-Set3
Item features:
The divisible housing SNL518-615 made of flake graphite cast iron comes in a set with the fitting self-aligning ball bearing insert 2218-K and a pair of locating rings FRB-12.5/160. In addition, the matching seal set TG (double lip seal) is included. The components of the set are selected, so that the housing can be mounted directly.
Set Components
Technical Data
Inside Ø (mm): | 80 |
Housing Type: | Plummer block bearing |
Seal: | open |
Locating Rings: | FRB-12.5/160 |
Housing Material: | Cast Iron |
Inside Ø Seal (mm): | 80 |
Bearing Insert: | 2218-K |
Type of lubrication: | oiled |
Adapter Sleeve: | H318 |
max. Operating Temperature: | +100°C |
min. Operating Temperature: | -10°C-20°C |
Item weight: | 17,61 kg |
Features
Pillow Block Housing
- the housing base is reinforced around the fastening holes and additonally strengthened with ribs, so there is no deformation during fastening of the housing; a centring collar helps with the alignment
- the seal set TG (double lip seal) is included
Self-Aligning Ball Bearing
- the self-aligning ball bearing 2218-K in a tapered design has two rows of balls and can carry radial loads and axial loads in both directions
- due to the construction as a self-aligning ball bearing misalignments and deflections of the shaft can be compensated
- temperature resistance: from -10 °C to +100 °C
Adapter Sleeve With Nut
- the adapter sleeve H318 is used to mount the self-aligning ball bearing with a tapered bore on a shaft; it consists of a conical metal sleeve, a tab washer and a locknut
Locating Rings
- the locating rings FRB-12.5/160 fix the self-aligning ball bearing in the housing and prevent axial displacements