Englisch
Deutsch
Split Pillow Block Housing SNL506-605 with Insert 2206-K TN and Adapter Sleeve H306, incl. 2 Locating Rings FRB-6/62
Item number:
SNL506-605-Set4
Item features:
The divisible housing SNL506-605 made of flake graphite cast iron comes in a set with the fitting self-aligning ball bearing insert 2206-K-TN and a pair of locating rings FRB-6/62. In addition, the matching seal set TG (double lip seal) is included. The components of the set are selected, so that the housing can be mounted directly.
Set Components
| Component | Item Number |
Techn. Scribble |
|---|---|---|
| Split Plummer Block Housing with Seal Set TG | SNL506-605 |
|
| Self-Aligning Ball Bearing | 2206-K-TN |
|
| Adapter Sleeve With Nut | H306 |
|
| Locating Rings | FRB-6/62 |
|
Technical Data
| Inside Ø (mm): | 25 |
| Inside Ø Seal (mm): | 25 |
| Housing Type: | Plummer block bearing |
| Seal: | open |
| Housing Material: | Cast Iron |
| Type of lubrication: | oiled |
| Locating Rings: | FRB-6/62 |
| Adapter Sleeve: | H306 |
| Bearing Insert: | 2206-K-TN |
| max. Operating Temperature: | +70°C+100°C |
| min. Operating Temperature: | -10°C-20°C |
| Item weight: | 2,40 kg |
Features
Pillow Block Housing
- the housing base is reinforced around the fastening holes and additonally strengthened with ribs, so there is no deformation during fastening of the housing; a centring collar helps with the alignment
- the seal set TG (double lip seal) is included
Self-Aligning Ball Bearing
- the self-aligning ball bearing 2206-K-TN in a tapered design has two rows of balls and can carry radial loads and axial loads in both directions
- due to the construction as a self-aligning ball bearing misalignments and deflections of the shaft can be compensated
- temperature resistance: from -10 °C to +70 °C
Adapter Sleeve With Nut
- the adapter sleeve H306 is used to mount the self-aligning ball bearing with a tapered bore on a shaft; it consists of a conical metal sleeve, a tab washer and a locknut
Locating Rings
- the locating rings FRB-6/62 fix the self-aligning ball bearing in the housing and prevent axial displacements