Englisch
Deutsch
Spherical Roller Bearing 23124 CC K (tapered) W33 120x200x62 mm
Item number:
23124-CC-K-W33
Item features:
With the swiveling inner ring, the spherical roller bearing 23124-CC-K-W33 offers excellent alignment error compensation. It has two rings with barrel-shaped rollers as rolling elements and can absorb very high radial and also axial forces. Main dimensions according to DIN 635-2.
Technical ScribbleZoomable
Technical Data
| Inside Ø (mm): | 120 |
| Outside Ø (mm): | 200 |
| Width (mm): | 62 |
| Tolerance for inside-Ø (mm): | 0/-0,02 |
| Tolerance for outside-Ø (mm): | 0/-0,03 |
| Tolerance for width (mm): | 0/-0,2 |
| Bore: | tapered (K) |
| Ring Material: | Rolling Bearing Steel |
| Rolling Element Material: | Rolling Bearing Steel |
| Cage Material: | Sheet Steel |
| Magnetic: | yes |
| Type of lubrication: | oiled |
| Permissible angular misalignment: | 3° |
| Item weight: | 7,98 kg |
Features
- Spherical roller bearing with two rows of rollers
- pivoting inner ring, misalignments and shaft deflections can be compensated
- suitable für very high radial and relatively high axial loads in both directions
- balanced ratio between radial load capacity, size and weight
- with tapered bore for mounting by means of adapter sleeve
- cage material: sheet steel. Resistant to fatigue and wear; provide good protection against impact loads and acceleration forces
- seal: open (without seal); for higher speeds than with sealed spherical roller bearings and easy relubrication
- good fixed bearing property, but can also be used as a floating bearing, each in both directions
- manufacturers of bearings, such as FAG, KOYO, NSK, SKF, SNR, etc. assign different suffixes for their characteristics, for better orientation take note of the comparison table of bearings (see further information)