English
Deutsch
from 2,49 € 
from 8,90 €
, 
or 
until 14:00 - the shipping takes place on the same day.
Spherical Roller Bearing 22310 CC K (tapered) W33 50x110x40 mm
Item number: 22310-CC-K-W33
Technical ScribbleZoomable
Technical Data
| Inside Ø (mm): | 50 |
| Outside Ø (mm): | 110 |
| Width (mm): | 40 |
| Tolerance for inside-Ø (mm): | 0/-0,012 |
| Tolerance for outside-Ø (mm): | 0/-0,015 |
| Tolerance for width (mm): | 0/-0,12 |
| Bore: | tapered (K) |
| Ring Material: | Rolling bearing steel |
| Rolling Element Material: | Rolling bearing steel |
| Cage Material: | Sheet Steel |
| Magnetic: | yes |
| Permissible angular misalignment: | 3° |
| Product weight: | 1,9200 kg |
Features
- Spherical roller bearing with two rows of rollers
- pivoting inner ring, misalignments and shaft deflections can be compensated
- suitable für very high radial and relatively high axial loads in both directions
- massive series with higher load capacity
- considerably higher load capacity than spherical roller bearings of other series
- with tapered bore for mounting by means of adapter sleeve
- cage material: sheet steel. Resistant to fatigue and wear; provide good protection against impact loads and acceleration forces
- seal: open (without seal); for higher speeds than with sealed spherical roller bearings and easy relubrication
- good fixed bearing property, but can also be used as a floating bearing, each in both directions
- manufacturers of bearings, such as FAG, KOYO, NSK, SKF, SNR, etc. assign different suffixes for their characteristics, for better orientation take note of the comparison table of bearings (see further information)
Complimentary Items
Adapter sleeve matching the bearing
Further Information
Rating
Question on item
Please use our product request form on the contact page to request articles made to specification