Self-Aligning Ball Bearings of the Series SS22 (Stainless Steel)

Special feature of this series: Main dimensions according to DIN 630. Self-aligning ball bearings of the series 22 are wider than self-aligning ball bearings of the series 12 with the same inner and outer diameter and in addition more resilient. They have rubber seals on both sides and are therefore well-protected against dust and dirt.

Datatable

Items 1 - 2 of 2

Reset all filters

Image may differ.

Stainless Steel Self-Aligning Ball Bearing SS 2205 2RS 25x52x18 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 29,45 €
from 10 pcs per 27,91 €
from 50 pcs per 27,27 €
from 200 pcs per 26,04 €
from 500 pcs per 24,80 €

31,00 € *

incl. 19% VAT , plus (Briefversand)

Image may differ.

Stainless Steel Self-Aligning Ball Bearing SS 2205 2RS TN 25x52x18 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 29,45 €
from 10 pcs per 27,91 €
from 50 pcs per 27,27 €
from 200 pcs per 26,04 €
from 500 pcs per 24,80 €

31,00 € *

incl. 19% VAT , plus (Briefversand)

Items 1 - 2 of 2

FILTER

Reset all filters

Special design of the ball bearing

Bore design, either cylindrical or tapered (1:12)

An extended inner ring is wider than the outer ring of the article.

Maximum permissible load capacity of the bearing based on the materials used and the geometric design.

Noise level of the bearing during operation.

Smooth-running bearings have low frictional resistance.

Resistance of the materials used in the bearing to water and other corrosive media.

Maximum permissible speed of the bearing.

Protection of the bearing from the ingress of foreign particles and liquids.

Highest ambient temperature at which the bearing can be used without restrictions

Lowest ambient temperature at which the bearing can be used without restrictions

The bearing clearance is the amount by which the two rings of a non-installed roller bearing can be displaced in relation to one another. There are different internal clearance classes. CN is "normal internal clearance" and is the best choice for many applications. C3, C4, ... indicates increased clearance. C2, C1, ... stands for reduced clearance.

Type of sealing of the bearing to protect it from contamination.

Inner and outer ring material

Material of the rolling element (i.e. the balls or rollers)

Material of the cage (the cage holds the rolling elements in place)

Material from which the bearing seal is made.

Type of lubrication of the rolling bearing. Rolling bearings are usually either greased, oiled or dry.