Self-Aligning Ball Bearing 2313 TN 65x140x48 mm
Item number:
2313-TN
Item features:
With the swiveling inner ring, the self aligning ball bearing 2313-TN offers excellent alignment error compensation. With the two rings of barrel-shaped rollers, it can absorb high radial forces. Main dimensions according to DIN 630.
Technical ScribbleZoomable
Technical Data
Inside Ø (mm): | 65 |
Outside Ø (mm): | 140 |
Width (mm): | 48 |
Bore: | cylindrical |
Extended Inner Ring: | no |
Tolerance for inside-Ø (mm): | 0/-0,015 |
Tolerance for outside-Ø (mm): | 0/-0,018 |
Tolerance for width (mm): | 0/-0,15 |
Seal: | open |
Sealing material: | without |
Cage Material: | Plastic |
Internal Clearance: | CN (Standard) |
Lifetime lubricated: | no |
Magnetic: | yes |
Norm: | DIN 630 |
Ring Material: | Rolling Bearing Steel |
Type of lubrication: | oiled |
Tolerance Class: | ABEC 1 / P0 |
max. Operating Temperature: | +100°C (briefly up to +150°C) |
Rolling Element Material: | Rolling Bearing Steel |
Permissible angular misalignment: | 3° |
min. Operating Temperature: | -40°C |
Item weight: | 3,23 kg |
Features
- self-aligning ball bearing with two rows of balls
- pivoting inner ring, misalignments and shaft deflections can be compensated
- suitable for high radial loads and light axial loads in both directions
- cage material: plastic; the low weight and the elasticity of the plastic have a positive effect on the sliding and emergency running properties as well as the shock resistance; suitable for quiet running
- seal: open (without seal); for higher speeds than with sealed ball bearings and easy relubrication
- good fixed bearing property, but can also be used as a floating bearing, each in both directions
- manufacturers of bearings, such as FAG, KOYO, NSK, SKF, SNR, etc. assign different suffixes for their characteristics, for better orientation take note of the comparison table of bearings (see further information)