Englisch
Deutsch
Rod End - Requiring Maintenance TSM6 open 6x18x9 mm
Item number: TSM6
The rod end TSM6 without seals requires maintenance and has a sliding contact surface combination steel/bronze with good emergency running characteristics. It is suitable for static loads as well as for shock loads and has an external thread. The main dimensions correspond to DIN ISO 12240-4 - dimension series K (DIN = German industrial norm).
Technical ScribbleZoomable
Technical Data
| Inside Ø (mm): | 6 |
| Outside Ø (mm): | 18 |
| Width (mm): | 9 |
| Tolerance for inside-Ø (mm): | 0,012/0 |
| Tolerance for width (mm): | 0/-0,12 |
| Mounting: | external thread (normal thread) |
| Maintenance: | Requiring Maintenance |
| Seal: | open |
| Ring Material: | Rolling Bearing Steel |
| Sliding Contact Surface Combination: | steel/bronze |
| Type of lubrication: | oiled |
| max. Operating Temperature: | +250°C |
| min. Operating Temperature: | -60°C |
| Norm: | DIN ISO 12240-4 |
| Item weight: | 20 g |
Features
- suitable for heavy static radial loads and radial shock loads as well as for low axial loads
- seal: open (without seal)
- material of the outer ring: steel
- material of the bearing shell: bronze
- material of the inner ring: chrome steel (100Cr6), hardened, polished
- better emergency running characteristics than steel/steel sliding contact surface combinations
- with right-hand thread
- comparable with: GAKR6-PB (INA), SAKAC 6 M (SKF)
- In addition to this article, we can also offer bearings of the brands FAG, KOYO, NSK, SKF, SNR, etc. on request.