Rod End - Requiring Maintenance TSF16.1 open 16x40x21 mm
Item number: TSF16.1
The rod end TSF16.1 without seals requires maintenance and has a sliding contact surface combination steel/bronze with good emergency running characteristics. It is suitable for static loads as well as for shock loads and has an internal thread. The main dimensions correspond to DIN ISO 12240-4 - dimension series K (DIN = German industrial norm).
Technical ScribbleZoomable
Technical Data
Inside Ø (mm): | 16 |
Outside Ø (mm): | 40 |
Width (mm): | 21 |
Tolerance for inside-Ø (mm): | 0,018/0 |
Tolerance for width (mm): | 0/-0,12 |
Mounting: | inner thread (fine thread) |
Maintenance: | Requiring Maintenance |
Seal: | open |
Ring Material: | Rolling Bearing Steel |
Sliding Contact Surface Combination: | steel/bronze |
Type of lubrication: | oiled |
max. Operating Temperature: | +250°C |
min. Operating Temperature: | -60°C |
Norm: | DIN ISO 12240-4 |
Item weight: | 0,22 kg |
Features
- suitable for heavy static radial loads and radial shock loads as well as for low axial laods
- seal: open (without seal)
- material of the outer ring: steel
- material of the bearing shell: bronze
- material of the inner ring: chrome steel (100Cr6), hardened, polished
- better emergency running characteristics than steel/steel sliding contact surface combinations
- with right-hand thread
- comparable with: GIKR16-PB (INA), SIKAC 16 M (SKF)
- In addition to this article, we can also offer bearings of the brands FAG, KOYO, NSK, SKF, SNR, etc. on request.