Rod End - Requiring Maintenance TSF10 open 10x26x14 mm
Item number: TSF10
The rod end TSF10 without seals requires maintenance and has a sliding contact surface combination steel/bronze with good emergency running characteristics. It is suitable for static loads as well as for shock loads and has an internal thread. The main dimensions correspond to DIN ISO 12240-4 - dimension series K (DIN = German industrial norm).
Technical ScribbleZoomable
Technical Data
Inside Ø (mm): | 10 |
Outside Ø (mm): | 26 |
Width (mm): | 14 |
Mounting: | inner thread (fine thread) |
Tolerance for inside-Ø (mm): | 0,015/0 |
Tolerance for width (mm): | 0/-0,12 |
Seal: | open |
Sliding Contact Surface Combination: | steel/bronze |
Norm: | DIN ISO 12240-4 |
Ring Material: | Rolling Bearing Steel |
Type of lubrication: | oiled |
Maintenance: | Requiring Maintenance |
max. Operating Temperature: | +250°C |
min. Operating Temperature: | -60°C |
Item weight: | 80 g |
Features
- suitable for heavy static radial loads and radial shock loads as well as for low axial laods
- seal: open (without seal)
- material of the outer ring: steel
- material of the bearing shell: bronze
- material of the inner ring: chrome steel (100Cr6), hardened, polished
- better emergency running characteristics than steel/steel sliding contact surface combinations
- with right-hand thread
- comparable with: GIKR10-PB (INA), SIKAC 10 M (SKF)
- In addition to this article, we can also offer bearings of the brands FAG, KOYO, NSK, SKF, SNR, etc. on request.