Rod End - Requiring Maintenance SI45ES 2RS 45x102x32 mm
Item number:
SI45ES-2RS
The rod end SI45ES-2RS with seals on both sides requires maintenance. It has a sliding contact surface combination steel/steel and is suitable for heavy static loads as well as for shock loads. It has an internal thread. The main dimensions correspond to DIN ISO 12240-4 - dimension series E (DIN = German industrial norm).
Technical ScribbleZoomable
Technical Data
Inside Ø (mm): | 45 |
Outside Ø (mm): | 102 |
Width (mm): | 32 |
Mounting: | inner thread (normal thread) |
Tolerance for inside-Ø (mm): | 0/-0,012 |
Tolerance for width (mm): | 0/-0,12 |
Seal: | 2RS |
Sliding Contact Surface Combination: | steel/steel |
Norm: | DIN ISO 12240-4 |
Ring Material: | Rolling Bearing Steel |
Type of lubrication: | oiled |
Maintenance: | Requiring Maintenance |
max. Operating Temperature: | +100°C (briefly up to +120°C) |
min. Operating Temperature: | -30°C |
Item weight: | 2,50 kg |
Features
- suitable for heavy static radial loads and radial shock loads as well as for low axial laods
- with right-hand thread
- relubrication through a lubrication hole in the housing
- seal: lip seal on both sides (2RS)
- If you need this bearing in RS design with only one seal and one open side, you can simply remove one of the two seals: to the instructions
- comparable with: GIR45-DO-2RS (INA)
- In addition to this article, we can also offer bearings of the brands FAG, KOYO, NSK, SKF, SNR, etc. on request.