Radial-Spherical Plain Bearing - Requiring Maintenance GEG50ES 2RS 50x90x56 mm
Item number:
GEG50ES-2RS
The spherical plain radial bearing GEG50ES-2RS requires maintenance and has a wider inner ring. It has a sliding contact surface combination steel/steel and is suitable for heavy static loads as well as for shock loads. The main dimensions correspond to DIN ISO 12240-1 - dimension series G (DIN = German industrial norm).
Technical ScribbleZoomable
Technical Data
Inside Ø (mm): | 50 |
Outside Ø (mm): | 90 |
Width (mm): | 56 |
Extended Inner Ring: | no |
Tolerance for inside-Ø (mm): | 0,025/0 |
Tolerance for outside-Ø (mm): | 0/-0,015 |
Tolerance for width (mm): | 0/-0,25 |
Seal: | 2RS |
Sliding Contact Surface Combination: | steel/steel |
Norm: | DIN ISO 12240-1 |
Ring Material: | Rolling Bearing Steel |
Maintenance: | Requiring Maintenance |
max. Operating Temperature: | +100°C (briefly up to +120°C) |
min. Operating Temperature: | -30°C |
Item weight: | 1,40 kg |
Features
- suitable for heavy static radial loads and radial shock loads as well as for low axial loads
- wider inner ring and larger outside diameter compared to GE .. ES and GEZ .. ES series, therefore suitable for higher load ratings and larger tilt angles
- with lubrication holes and lubrication groove in both rings
- seal: lip seal on both sides (2RS)
- If you need this bearing in RS design with only one seal and one open side, you can simply remove one of the two seals: to the instructions
- material: chrome steel (100Cr6)
- comparable with: GE50-FO-2RS (INA), GEH 50 ES-SKF (SKF)
- In addition to this article, we can also offer bearings of the brands FAG, KOYO, NSK, SKF, SNR, etc. on request.