Radial-Spherical Plain Bearing - Requiring Maintenance GEG10E open 10x22x12 mm
Item number: GEG10E
The spherical plain radial bearing GEG10E without seals requires maintenance and has a wider inner ring. It has a sliding contact surface combination steel/steel and is suitable for heavy static loads as well as for shock loads. The main dimensions correspond to DIN ISO 12240-1 - dimension series G (DIN = German industrial norm).
Technical ScribbleZoomable
Technical Data
Inside Ø (mm): | 10 |
Outside Ø (mm): | 22 |
Width (mm): | 12 |
Extended Inner Ring: | no |
Tolerance for inside-Ø (mm): | 0,015/0 |
Tolerance for outside-Ø (mm): | 0/-0,009 |
Tolerance for width (mm): | 0/-0,18 |
Seal: | open |
Sliding Contact Surface Combination: | steel/steel |
Norm: | DIN ISO 12240-1 |
Ring Material: | Rolling Bearing Steel |
Maintenance: | Requiring Maintenance |
max. Operating Temperature: | +200°C |
min. Operating Temperature: | -60°C |
Item weight: | 20 g |
Features
- suitable for heavy static radial loads and radial shock loads as well as for low axial loads
- wider inner ring and larger outside diameter compared to GE .. ES and GEZ .. ES series, therefore suitable for higher load ratings and larger tilt angles
- with lubrication holes and lubrication groove in both rings
- seal: open (without seal)
- material: chrome steel (100Cr6)
- comparable with: GE10-FO (INA), GEH 10 E (SKF)
- In addition to this article, we can also offer bearings of the brands FAG, KOYO, NSK, SKF, SNR, etc. on request.