Radial Shaft Seals BA-FKM

Special feature of this series: Shaft seals of the BA-FKM type are suitable for various applications. They are made of FKM (fluoro rubber, e.g. VITON®) and have a sealing lip. By using FKM, the shaft seal is more heat resistant and chemically more resistant to aromatic hydrocarbons than NBR shaft seals. In addition, significantly higher speeds are possible and by using a tension spring made of stainless steel, the shaft seal is protected against corrosion. The vulcanized metal reinforcement ring ensures high strength and the tension spring made of stainless steel for a tight fit on the shaft.

Datatable

Items 1 - 2 of 2

Reset all filters

Image may differ.

Radial Shaft Seal BA-FKM 115x140x12 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 67,10 €
from 10 pcs per 63,57 €
from 50 pcs per 62,17 €
from 200 pcs per 59,33 €
from 500 pcs per 56,51 €

70,64 € *

incl. 19% VAT , (Briefversand)

Image may differ.

Radial Shaft Seal BA-FKM-SF 115x140x12 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 61,74 €
from 10 pcs per 58,49 €
from 50 pcs per 57,19 €
from 200 pcs per 54,59 €
from 500 pcs per 51,99 €

64,99 € *

incl. 19% VAT , (Briefversand)

Items 1 - 2 of 2

FILTER

Reset all filters

All radial shaft seals have a sealing lip at the height of tension spring to seal off the liquid. BASL design radial shaft seals have an additional sealing lip on the dry side, which protects against dust and dirt.

Resistance of the materials used in the bearing to water and other corrosive media.

Protection of the bearing from the ingress of foreign particles and liquids.

Highest ambient temperature at which the bearing can be used without restrictions

Lowest ambient temperature at which the bearing can be used without restrictions

Material from which the bearing seal is made.

Material from which the springs for the backstop are made.