Radial Insert Ball Bearing with Adapter Sleeve UK207 + H2307 - Shaft: 30 mm

    Item number: UK207+H2307
Rate now
Item features:
The bearing insert UK207 comes in a set with the fitting adapter sleeve. It can be easily attached to the shaft or inserted in a housing and is suitable for radial loads. Main dimensions according to DIN 626-1.
  • Delivery time: Available

From Unit price / Set
4 16,24 €*
10 15,74 €*
50 15,05 €*
200 14,71 €*
500 14,38 €*
17,12 €
incl. 19% VAT , plus shipping charge (Standard)
Set
Secure Shopping
Sofort Überweisung Rechnung Kreditkarte Lastschrift Nachnahme

Technical ScribbleZoomable

Technical Data

Inside Ø (mm): 30
Outside Ø (mm): 72
Width (mm): 20
Width Extended Inner Ring (mm): 28
Extended Inner Ring: no
Tolerance for inside-Ø (mm): 0,021/0
Tolerance for outside-Ø (mm): 0/-0,013
Tolerance for width (mm): 0/-0,12
Bore-Ø (mm): 35
Seal: 2-peace sealing system
Recommended tightening torque for shaft fastener (Nm): 40
Cage Material: Sheet Steel
Lifetime lubricated: yes
Magnetic: yes
Norm: DIN 626-1
Ring Material: Rolling Bearing Steel
Type of lubrication: greased
Shaft Fastening: Adapter Sleeve
max. Operating Temperature: +100°C (briefly up to +120°C)
Rolling Element Material: Rolling Bearing Steel
min. Operating Temperature: -20°C
Item weight: 0,56 kg

Features

Radial Insert Ball Bearing

  • with conical bore for fixing the inner ring by means of adapter sleeves on a shaft
  • suitable for mounting in a housing bearing
  • suitable for high loads and high speeds
  • suitable for changing directions of rotation
  • the spherical outer surface of the outer ring can compensate misalignment if it is installed in a corresponding housing
  • two-piece sealing system: with sheet steel washer reinforced rubber seal inside; outside additionally with upstream slinger made of sheet steel for high mechanical protection against foreign matter
  • lubricated for life; under normal operating conditions relubrication is not required

Adapter Sleeve

  • serves for fixing of bearings with a tapered bore on a shaft
  • consists of a tapered metal sleeve, a tab washer and a locknut
  • Upon fixing a bearing with the help of an adapter sleeve the inner ring of the bearing takes over the function of an annular spring and presses the slotted adapter sleeve on the shaft. The internal clearance of bearings can also be adjusted via the adapter sleeve at the same time. A hook wrench is used for the process of clamping.
  • In addition to this article, we can also offer bearings of the brands FAG, KOYO, NSK, SKF, SNR, etc. on request.

Further Information

Dimensions

Typ Bore-∅
d1 in mm
Shaft-∅
d in mm
Dimensions in mm Weight
(kg)
D Bi Be T
UK205-H2305 25 20 52 23 17 4,2 0,16
UK206-H2306 30 25 62 26 19 5,2 0,25
UK207-H2307 35 30 72 28 20 5,9 0,37
UK208-H2308 40 35 80 29 21 6,2 0,47
UK209-H2309 45 40 85 31 22 6,6 0,52
UK210-H2310 50 45 90 31 24 6,5 0,59
UK211-H2311 55 50 100 34 25 7,0 0,80
UK212-H2312 60 55 110 36 27 7,6 1,02
UK213-H2313 65 60 120 36 28 8,5 1,34
UK215-H2315 75 65 130 41 30 9,0 1,50
UK216-H2316 80 70 140 44 33 10,3 1,96
UK217-H2317 85 75 150 46 35 10,2 2,42
UK218-H2318 90 80 160 48 37 11,2 3,00

Customer Ratings

Write the first review for this item and help others make a purchase decision!:

Average item rating

Write a review
  • Delivery time: Available

From Unit price / Set
4 16,24 €*
10 15,74 €*
50 15,05 €*
200 14,71 €*
500 14,38 €*
17,12 €
incl. 19% VAT , plus shipping charge (Standard)
Set
Secure Shopping
Sofort Überweisung Rechnung Kreditkarte Lastschrift Nachnahme