Englisch
Deutsch
Radial Insert Ball Bearing (Maintenance-Free) UEL212 - Shaft: 60 mm
Item number: UEL212
Item features:
The bearing insert UEL212 can be easily attached to the shaft with the aid of the eccentric ring or inserted in a housing. It is suitable for high radial loads, high speeds and is maintenance-free. Main dimensions according to DIN 626-1.
Technical ScribbleZoomable
Technical Data
| Inside Ø (mm): | 60 |
| Outside Ø (mm): | 110 |
| Width (mm): | 27 |
| Width Extended Inner Ring (mm): | 61.9 |
| Tolerance for inside-Ø (mm): | 0,024/0 |
| Tolerance for outside-Ø (mm): | 0/-0,015 |
| Tolerance for width (mm): | 0/-0,15 |
| Extended Inner Ring: | both sides |
| Shaft Fastening: | Eccentric Collar |
| Seal: | 2-peace sealing system |
| Ring Material: | Rolling Bearing Steel |
| Rolling Element Material: | Rolling Bearing Steel |
| Cage Material: | Sheet Steel |
| Type of lubrication: | greased |
| Lifetime lubricated: | yes |
| Recommended tightening torque for shaft fastener (Nm): | 22 |
| Grub Screw: | M10 |
| max. Operating Temperature: | +100°C (briefly up to +120°C) |
| min. Operating Temperature: | -20°C |
| Magnetic: | yes |
| Norm: | DIN 626-1 |
| Item weight: | 1,87 kg |
Features
- is fastened with eccentric ring and grub screws on the shaft
- suitable for mounting in a housing bearing
- suitable for high loads and high speeds
- suitable for changing directions of rotation and high demands on smooth running
- the spherical outer surface of the outer ring can compensate misalignment if it is installed in a corresponding housing
- two-piece sealing system: with sheet steel washer reinforced rubber seal inside; outside additionally with upstream slinger made of sheet steel for high mechanical protection against foreign matter
- lubricated for life; under normal operating conditions relubrication is not required
- maintenance-free
- comparable with: UG212 (AMI), HC212 (NBR), NA212 (FYH), YEL212 (SKF), EW212 (NSK)
- In addition to this article, we can also offer bearings of the brands FAG, KOYO, NSK, SKF, SNR, etc. on request.