Radial Insert Ball Bearing (Maintenance-Free) UEL205 - Shaft: 25 mm
Item number: UEL205
Item features:
The bearing insert UEL205 can be easily attached to the shaft with the aid of the eccentric ring or inserted in a housing. It is suitable for high radial loads, high speeds and is maintenance-free. Main dimensions according to DIN 626-1.
Technical ScribbleZoomable
Technical Data
Inside Ø (mm): | 25 |
Outside Ø (mm): | 52 |
Width (mm): | 17 |
Width Extended Inner Ring (mm): | 34.9 |
Tolerance for inside-Ø (mm): | 0,018/0 |
Tolerance for outside-Ø (mm): | 0/-0,013 |
Tolerance for width (mm): | 0/-0,12 |
Extended Inner Ring: | both sides |
Shaft Fastening: | Eccentric Collar |
Seal: | 2-peace sealing system |
Ring Material: | Rolling Bearing Steel |
Rolling Element Material: | Rolling Bearing Steel |
Cage Material: | Sheet Steel |
Type of lubrication: | greased |
Lifetime lubricated: | yes |
Recommended tightening torque for shaft fastener (Nm): | 5 |
Grub Screw: | M6 |
max. Operating Temperature: | +100°C (briefly up to +120°C) |
min. Operating Temperature: | -20°C |
Magnetic: | yes |
Norm: | DIN 626-1 |
Item weight: | 0,27 kg |
Features
- is fastened with eccentric ring and grub screws on the shaft
- suitable for mounting in a housing bearing
- suitable for high loads and high speeds
- suitable for changing directions of rotation and high demands on smooth running
- the spherical outer surface of the outer ring can compensate misalignment if it is installed in a corresponding housing
- two-piece sealing system: with sheet steel washer reinforced rubber seal inside; outside additionally with upstream slinger made of sheet steel for high mechanical protection against foreign matter
- lubricated for life; under normal operating conditions relubrication is not required
- maintenance-free
- comparable with: UG205 (AMI), HC205 (NBR), NA205 (FYH), YEL205 (SKF), EW205 (NSK)
- In addition to this article, we can also offer bearings of the brands FAG, KOYO, NSK, SKF, SNR, etc. on request.