Englisch
Deutsch
Radial Insert Ball Bearing SB202 RST - Shaft: 15 mm
Item number:
SB202-RST
Item features:
The bearing insert SB202 RST can be easily attached to the shaft with the grub screws or inserted in a housing. It is suitable for high radial loads. Main dimensions according to DIN 626-1.
Technical ScribbleZoomable
Technical Data
| Inside Ø (mm): | 15 |
| Outside Ø (mm): | 40 |
| Width (mm): | 12 |
| Width Extended Inner Ring (mm): | 22 |
| Tolerance for inside-Ø (mm): | 0,015/0 |
| Tolerance for outside-Ø (mm): | 0/-0,009 |
| Tolerance for width (mm): | 0/-0,12 |
| Extended Inner Ring: | one side |
| Shaft Fastening: | Grub Screws |
| Seal: | RST |
| Ring Material: | Rolling Bearing Steel |
| Rolling Element Material: | Rolling Bearing Steel |
| Cage Material: | Sheet Steel |
| Type of lubrication: | greased |
| Lifetime lubricated: | yes |
| Recommended tightening torque for shaft fastener (Nm): | 3 |
| Grub Screw: | M5 |
| max. Operating Temperature: | +100°C (briefly up to +120°C) |
| min. Operating Temperature: | -20°C |
| Magnetic: | yes |
| Norm: | DIN 626-1 |
| Item weight: | 0,10 kg |
Features
- with extended inner ring and grub screws for fixing the inner ring on a shaft
- suitable for mounting in a housing bearing
- suitable for high loads
- Seal: Contact seal on both sides made of a profiled sheet steel disc with an integrated rubber contact lip for a high level of protection against dirt.
- lubricated for life; under normal operating conditions relubrication is not required
- the spherical outer surface of the outer ring can compensate misalignment if it is installed in a corresponding housing
- comparable with: YAT202 (SKF), UB202 (NSK), AS202 (NTN), GAY15 (FAG)
- In addition to this article, we can also offer bearings of the brands FAG, KOYO, NSK, SKF, SNR, etc. on request.