Englisch
Deutsch
Radial Insert Ball Bearing (Maintenance-Free) CS205 2RS - Shaft: 25 mm
Item number:
CS205-2RS
Item features:
The bearing insert CS205 2RS can be easily attached to the shaft or inserted in a housing. It is suitable for high radial loads, high speeds and is maintenance-free. Main dimensions according to DIN 626-1.
Technical ScribbleZoomable
Technical Data
| Inside Ø (mm): | 25 |
| Outside Ø (mm): | 52 |
| Width (mm): | 15 |
| Tolerance for inside-Ø (mm): | 0/-0,01 |
| Tolerance for outside-Ø (mm): | 0/-0,013 |
| Tolerance for width (mm): | 0/-0,12 |
| Extended Inner Ring: | no |
| Shaft Fastening: | Fit |
| Seal: | 2RS |
| Ring Material: | Rolling Bearing Steel |
| Rolling Element Material: | Rolling Bearing Steel |
| Cage Material: | Sheet Steel |
| Type of lubrication: | greased |
| Lifetime lubricated: | yes |
| Recommended tightening torque for shaft fastener (Nm): | without |
| max. Operating Temperature: | +100°C (briefly up to +120°C) |
| min. Operating Temperature: | -20°C |
| Magnetic: | yes |
| Norm: | DIN 626-1 |
| Item weight: | 0,13 kg |
Features
- suitable for mounting in a housing bearing
- suitable for high loads and high speeds
- suitable for changing directions of rotation and high demands on smooth running
- the spherical outer surface of the outer ring can compensate misalignment if it is installed in a corresponding housing
- seal: contact lip seal on both sides made of rubber (2RS) for high sealing effect
- If you need this bearing in RS design with only one seal and one open side, you can simply remove one of the two seals: to the instructions
- lubricated for life; under normal operating conditions relubrication is not required
- maintenance-free
- comparable with: 1726205 (SKF)
- In addition to this article, we can also offer bearings of the brands FAG, KOYO, NSK, SKF, SNR, etc. on request.