High Precision Miniature Ball Bearing MR 126 2RS CN V2 P6 GS1 6x12x4 mm
Item number:
MR-126-2RS-CN-V2-P6-GS1
Item features:
For use in special conditions. The precision miniature ball bearing MR-126-2RS-CN-V2-P6-GS1 is small and suitable for installation with limited space and on thin shafts. It can withstand very high speeds.
Technical ScribbleZoomable
Technical Data
Inside Ø (mm): | 6 |
Outside Ø (mm): | 12 |
Width (mm): | 4 |
Tolerance for inside-Ø (mm): | 0/-0,008 |
Tolerance for outside-Ø (mm): | 0/-0,008 |
Tolerance for width (mm): | 0/-0,12 |
Bore: | cylindrical |
Extended Inner Ring: | no |
Seal: | 2RS |
Sealing material: | NBR |
Ring Material: | Rolling Bearing Steel |
Rolling Element Material: | Rolling Bearing Steel |
Cage Material: | Sheet Steel |
Type of lubrication: | greased |
Lubrication: | Multemp SRL |
Lifetime lubricated: | yes |
Application: | Electric motors |
Seal Colour: | Black |
Internal Clearance: | CN (Standard) |
Tolerance Class: | ABEC 3 / P6 |
Vibration Class: | V2 |
max. Operating Temperature: | +100°C (briefly up to +120°C) |
min. Operating Temperature: | -40°C |
Magnetic: | yes |
Norm: | DIN 625-1 |
Item weight: | 2 g |
Features
- miniature ball bearing with smallest dimensions
- suitable for high radial loads and light axial loads in both directions
- suitable for high running accuracy, quiet running and very high speeds
- seal: contact lip seal on both sides made of rubber (2RS) for high sealing effect
- If you need this bearing in RS design with only one seal and one open side, you can simply remove one of the two seals: to the instructions
- good fixed bearing property, but can also be used as a floating bearing, each in both directions
- manufacturers of bearings, such as FAG, KOYO, NSK, SKF, SNR, etc. assign different suffixes for their characteristics, for better orientation take note of the comparison table of bearings (see further information)
- tolerance class: P6 - high dimensional, form and running accuracy
- vibration class: V2 - lower tolerances with regard to occurring vibrations during operation
Further Information
- What does radial and axial load capacity mean?
- Fit recommendations for mounting
- Info sheet ball bearing
- Information about ball bearing seals
- Internal clearance and operating clearance
- Comparison list of roller bearings
- Comparison of features of roller bearings
- How do I clean my bearings?
- How do I grease or oil my bearings?
- How do I remove a sealing washer or cover plate?