Pillow Block Unit UKP210 as a Set Comprising Bearing Insert UK210, Adapter Sleeve H2310 and Pillow Block Housing P210 - Shaft: 45 mm
Item number:
UKP210-Set
Item features:
The housing bearing unit UKP210 as a set includes the housing P210, the single row radial insert ball bearing UK210 (shaft: 45 mm) and the adapter sleeve H2310. The set components are coordinated with each other so that they can be mounted directly. The set is suitable for high radial loads, alternating directions of rotation and high speeds.
Set Components
Technical Data
Inside Ø (mm): | 45 |
Housing Type: | Plummer block bearing |
Number of Mounting Holes: | 2 |
Seal: | 2-peace sealing system |
Recommended tightening torque for shaft fastener (Nm): | 75 |
Housing Material: | Cast Iron |
Housing No.: | P 210 |
Cage Material: | Sheet Steel |
Bearing No.: | UK 210 |
Lifetime lubricated: | yes |
Ring Material: | Rolling Bearing Steel |
Type of lubrication: | greased |
Grease Nipples: | Angled Type B (45°) |
Shaft Fastening: | Adapter Sleeve |
max. Operating Temperature: | +100°C (briefly up to +120°C) |
Rolling Element Material: | Rolling Bearing Steel |
min. Operating Temperature: | -20°C |
Item weight: | 2,93 kg |
Features
Pillow block housing
- housing with long base for mounting on flat surfaces
- extremely robust cast iron housing
- with integrated lubrication nipple, if difficult operating conditions make relubrication necessary
- the housing is painted to protect against corrosion; the bearing insert and the mounting surface are treated with anti-corrosion oil
Bearing insert / Radial insert ball bearing
- with conical bore for fixing the inner ring by means of adapter sleeves on a shaft
- suitable for changing directions of rotation
- the compensation of static misalignments is possible up to an angle of 2° due to the spherical outer surface of the outer ring
- two-piece sealing system: with sheet steel washer reinforced rubber seal inside; outside additionally with upstream slinger made of sheet steel for high mechanical protection against foreign matter
- lubricated for life; under normal operating conditions, relubrication is not necessary
- consists of a tapered metal sleeve, a tab washer and a locknut
- Upon fixing a bearing with the help of an adapter sleeve the inner ring of the bearing takes over the function of an annular spring and presses the slotted adapter sleeve on the shaft. The internal clearance of bearings can also be adjusted via the adapter sleeve at the same time. A hook wrench is used for the process of clamping.
Adapter sleeve
In addition to this set, we can also offer bearings of the brands FAG, KOYO, NSK, SKF, SNR, etc. on request.