Pillow Block Unit SBPP204 as a Set Comprising Bearing Insert SB204 2RS and Pillow Block Housing PP204 - Shaft: 20 mm
Item number:
SBPP204-Set
Item features:
The housing bearing unit SBPP204 as a set includes the housing PP204 and the single row radial insert ball bearing SB204-2RS (shaft: 20 mm). The set components are coordinated with each other so that they can be mounted directly. The set is suitable for high radial loads. The set SBPP204 is comparable with: PBY20 (INA), UBPP204 (NSK) or LPB20A (RHP).
Set Components
Technical Data
Inside Ø (mm): | 20 |
Housing Type: | Plummer block bearing |
Tolerance for inside-Ø (mm): | 0,018/0 |
Number of Mounting Holes: | 2 |
Seal: | 2RS |
Recommended tightening torque for shaft fastener (Nm): | 5 |
Housing Material: | galvanized Sheet Steel |
Housing No.: | PP 204 |
Grub Screw: | M6 |
Cage Material: | Sheet Steel |
Bearing No.: | SB 204 |
Lifetime lubricated: | yes |
Norm: | DIN 626-2 |
Ring Material: | Rolling Bearing Steel |
Type of lubrication: | greased |
Shaft Fastening: | Grub Screws |
max. Operating Temperature: | +100°C (briefly up to +120°C) |
Rolling Element Material: | Rolling Bearing Steel |
min. Operating Temperature: | -20°C |
Item weight: | 0,25 kg |
Features
Pillow block housing
Bearing insert / Radial insert ball bearing
In addition to this set, we can also offer bearings of the brands FAG, KOYO, NSK, SKF, SNR, etc. on request.
- the housing is made of sheet steel and is thus suitable for space-saving installations
- increased corrosion resistance due to galvanized sheet steel
- housing with long base for mounting on flat surfaces
- low weight
The bearing insert is comparable with YAT204 (SKF), UB204 (NSK), AS204 (NTN), GAY20 (FAG).
- with extended inner ring and grub screws (pre-assembled) for fastening the inner ring on a shaft
- smooth running and good behavior in case of tilting due to the extended inner ring
- the compensation of static misalignments is possible up to an angle of 2° due to the spherical outer surface of the outer ring
- seal: contact lip seal on both sides made of rubber (2RS) for high sealing effect
- lubricated for life; under normal operating conditions, relubrication is not necessary