Pillow Block Unit SBP206 as a Set Comprising Bearing Insert SB206-2RS and Pillow Block Housing P206 - Shaft: 30 mm
Item number:
SBP206-Set
Item features:
The housing bearing unit SBP206 as a set includes the housing P206 and the single row radial insert ball bearing SB206-2RS (shaft: 30 mm). The set components are coordinated with each other so that they can be mounted directly. The set is suitable for high radial loads. The set SBP206 is comparable with: RATY30 (INA) or ASPFL206 (NTN SNR).
Set Components
Technical Data
Inside Ø (mm): | 30 |
Housing Type: | Plummer block bearing |
Extended Inner Ring: | one side |
Number of Mounting Holes: | 2 |
Seal: | 2RS |
Recommended tightening torque for shaft fastener (Nm): | 5 |
Housing Material: | Cast Iron |
Housing No.: | P 206 |
Grub Screw: | M6 |
Cage Material: | Sheet Steel |
Bearing No.: | SB 206-2RS |
Lifetime lubricated: | yes |
Magnetic: | yes |
Norm: | DIN 626-1 |
Ring Material: | Rolling Bearing Steel |
Type of lubrication: | greased |
Shaft Fastening: | Grub Screws |
max. Operating Temperature: | +100°C (briefly up to +120°C) |
Rolling Element Material: | Rolling Bearing Steel |
min. Operating Temperature: | -20°C |
Item weight: | 1,12 kg |
Features
Pillow block housing
- housing with long base for mounting on flat surfaces
- extremely robust cast iron housing
- with integrated lubrication nipple, if difficult operating conditions make relubrication necessary
- the housing is painted to protect against corrosion; the bearing insert and the mounting surface are treated with anti-corrosion oil
Bearing insert / Radial insert ball bearing
- with extended inner ring and grub screws (pre-assembled) for fastening the inner ring on a shaft
- smooth running and good behavior in case of tilting due to the extended inner ring
- the compensation of static misalignments is possible up to an angle of 2° due to the spherical outer surface of the outer ring
- seal: contact lip seal on both sides made of rubber (2RS) for high sealing effect
- lubricated for life; under normal operating conditions, relubrication is not necessary
The bearing insert is comparable with YAT206 (SKF), UB206 (NSK), AS206 (NTN), GAY30 (FAG).
In addition to this set, we can also offer bearings of the brands FAG, KOYO, NSK, SKF, SNR, etc. on request.