Englisch
Deutsch
Pillow Block Unit SAP208 as a Set Comprising Bearing Insert SA208-2RS and Pillow Block Housing P208 - Shaft: 40 mm
Item number:
SAP208-Set
Item features:
The housing bearing unit SAP208 as a set includes the housing P208 and the single row radial insert ball bearing SA208-2RS (shaft: 40 mm). The set components are coordinated with each other so that they can be mounted directly. The set is suitable for high radial loads. The set SAP208 is comparable with: SY40FM (SKF), PASE40 (INA) or NP40EC (RHP).
Set Components
Technical Data
| Inside Ø (mm): | 40 |
| Housing Type: | Plummer block bearing |
| Extended Inner Ring: | one side |
| Shaft Fastening: | Eccentric Collar |
| Number of Mounting Holes: | 2 |
| Seal: | 2RS |
| Ring Material: | Rolling Bearing Steel |
| Rolling Element Material: | Rolling Bearing Steel |
| Housing Material: | Cast Iron |
| Cage Material: | Sheet Steel |
| Type of lubrication: | greased |
| Lifetime lubricated: | yes |
| Recommended tightening torque for shaft fastener (Nm): | 11 |
| Bearing No.: | SA 208-2RS |
| Housing No.: | P 208 |
| Grub Screw: | M8 |
| max. Operating Temperature: | +100°C (briefly up to +120°C) |
| min. Operating Temperature: | -20°C |
| Magnetic: | yes |
| Norm: | DIN 626-1 |
| Item weight: | 1,97 kg |
Features
Pillow block housing
- housing with long base for mounting on flat surfaces
- extremely robust cast iron housing
- with integrated lubrication nipple, if difficult operating conditions make relubrication necessary
- the housing is painted to protect against corrosion; the bearing insert and the mounting surface are treated with anti-corrosion oil
Bearing insert / Radial insert ball bearing
- is fastened with eccentric ring and grub screws on the shaft
- suitable for high speeds with the same direction of rotation
- the compensation of static misalignments is possible up to an angle of 2° due to the spherical outer surface of the outer ring
- two-piece sealing system: with sheet steel washer reinforced rubber seal inside; outside additionally with upstream slinger made of sheet steel for high mechanical protection against foreign matter
- lubricated for life; under normal operating conditions, relubrication is not necessary
The bearing insert is comparable with YET208 (SKF), GRAE40 (FAG), 16208, EN208 (NSK), AEL208 (NTN).
In addition to this set, we can also offer bearings of the brands FAG, KOYO, NSK, SKF, SNR, etc. on request.