Englisch
Deutsch
Pillow Block Housing Unit WP-SSBP206 - Shaft 30 mm
Item number:
WP-SSBP206
Item features:
The plummer block housing unit WP-SSBP206 consists of a plummer block housing made of plastic for flexible installation in a wide variety of constructions, a single-row, long-life radial insert ball bearing/bearing insert made of stainless steel with an extended inner ring on one side and the matching grub screws for uncomplicated fixing of inner ring on a shaft and a watertight rubber seal on the back. The housing can be mounted on flat surfaces via 2 slotted holes.
In addition, an open or closed clip-on plastic cap can be ordered.
In addition, an open or closed clip-on plastic cap can be ordered.
Technical ScribbleZoomable
Technical Data
| Inside Ø (mm): | 30 |
| Housing Type: | Plummer block bearing |
| Tolerance for inside-Ø (mm): | 0,018/0 |
| Number of Mounting Holes: | 2 |
| Recommended tightening torque for shaft fastener (Nm): | 5 |
| Housing Colour: | Black |
| Housing Material: | Plastic |
| Housing No.: | P 206 |
| Cage Material: | Stainless Steel |
| Bearing No.: | SSB 206 |
| Lifetime lubricated: | yes |
| Ring Material: | Stainless Steel |
| Type of lubrication: | greased |
| Shaft Fastening: | Grub Screws |
| max. Operating Temperature: | +90°C |
| Rolling Element Material: | Stainless Steel |
| min. Operating Temperature: | -20°C |
| Item weight: | 0,49 kg |
Features
- Consisting of a stainless steel bearing insert and a plastic (thermoplastic) housing
- housing with long base for robust radial mounting by two bolts on flat surfaces
- the housing is made of plastic, lightweight, hygienic, corrosion-resistant, damping, non-magnetic and waterproof
- the stainless steel bearing insert is also corrosion-resistant and has an extended inner ring with grub screws
- The bearing insert is fixed to the shaft with two grub screws
- smooth running and good behaviour in case of tilting due to the extended inner ring
- Static misalignments can be compensated up to an angle of ±2.5°.
- Equipped with a water-proof rubber seal of the type BASL on the back, which reliably seals the shaft. The mainspring ensures additional pressure of the lip against the shaft.
- lubricated for life: relubrication is not necessary under normal operating conditions
- with integrated grease nipple for convenient relubrication of the bearing insert if difficult operating conditions make relubrication necessary
- The addition of a waterproof protective cap reliably protects the bearing from environmental influences such as dust, dirt or splash water
- Ideal for applications in humid conditions, contact with water, alkaline or acidic solutions
- Application in a wide range of industries e.g. feed processing, canning, bottling, pharmaceutical industry, chemical processing and photographic industry
Complimentary Items
caps matching the Pillow Block Housing Unit