Pillow Block Housing Unit with Adapter Sleeve UKP213+H2313 - Shaft: 60 mm
Item number: UKP213+H2313
Item features:
The pillow block bearing UKP213+H2313 is suitable for high radial loads and is particularly robust with its gray cast iron housing. The adapter sleeve required for mounting the bearing insert is included.
Technical ScribbleZoomable
Technical Data
Inside Ø (mm): | 60 |
Housing Type: | Plummer block bearing |
Tolerance for inside-Ø (mm): | 0,03/0 |
Number of Mounting Holes: | 2 |
Recommended tightening torque for shaft fastener (Nm): | 150 |
Housing Material: | Cast Iron |
Housing No.: | P 213 |
Cage Material: | Sheet Steel |
Bearing No.: | UK 213 |
Lifetime lubricated: | yes |
Ring Material: | Rolling Bearing Steel |
Type of lubrication: | greased |
Grease Nipples: | Straight Type A (180°) |
Shaft Fastening: | Adapter Sleeve |
max. Operating Temperature: | +100°C (briefly up to +120°C) |
Rolling Element Material: | Rolling Bearing Steel |
min. Operating Temperature: | -20°C |
Item weight: | 6,00 kg |
Features
- consisting of a ball bearing insert UK 213, a cast iron housing P 213 and an adapter sleeve H2313
- suitable for mounting on flat surfaces and high radial load capacities
- the housing is made of cast iron and therefore inexpensive and robust
- fixing of the inner ring by concentric adapter sleeve
- static misalignments can be compensated up to an angle of 2°
- two-piece sealing system: with sheet steel washer reinforced rubber seal inside; outside additionally with upstream slinger made of sheet steel for high mechanical protection against foreign matter
- lubricated for life; under normal operating conditions relubrication is not required
- housing with integrated lubrication hole
- to protect against corrosion, the housing is painted; the bearing insert and the mounting surface are treated with corrosion protection oil
- In addition to this article, we can also offer bearings of the brands FAG, KOYO, NSK, SKF, SNR, etc. on request.